Hex Key for "Small Arm System" of Multifunction Arm Mounting System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scaled down Hex Key for the smaller variant of the Multifunction Arm Mounting System
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 67
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I was a bit dumbfounded when I saw there wasn't a scaled down version of the hex key for the Small Arm variant of the system. So I decided to make one and upload it for people to easily get.
I scaled down the model to 61% of it's original size. The original creator states that the Small Arm variant is 60% of the original size, but when scaling down that small it was a bit too loose. Your printer's tuning may vary.
I've included both the raw scaled down version as well as a version with a longer handle for better torque since it is smaller.
I printed in PLA .20 with 4 walls for a bit more extra strength, but you can likely get away with most sturdy filaments and settings.