Hex Key for "Small Arm System" of Multifunction Arm Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scaled down Hex Key for the smaller variant of the Multifunction Arm Mounting System
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I was a bit dumbfounded when I saw there wasn't a scaled down version of the hex key for the Small Arm variant of the system. So I decided to make one and upload it for people to easily get.
I scaled down the model to 61% of it's original size. The original creator states that the Small Arm variant is 60% of the original size, but when scaling down that small it was a bit too loose. Your printer's tuning may vary.
I've included both the raw scaled down version as well as a version with a longer handle for better torque since it is smaller.
I printed in PLA .20 with 4 walls for a bit more extra strength, but you can likely get away with most sturdy filaments and settings.