Towel Holder using PVC pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A variable-size towel holder rack -- cut the PVC pipe to your desired length. In addition to two of the printed…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A variable-size towel holder rack -- cut the PVC pipe to your desired length.
In addition to two of the printed pieces, you'll need four drywall screws and a length of 1" schedule 40 PVC pipe. (Note that its outer diameter is roughly 33.5mm, not 1".)
Prints well without support or rafts. I recommend at least 20% infill for strength. I printed at 0.2mm layer height, but this shouldn't be especially important.
Print Settings
Printer:
Hictop Prusa Mendel i3 clone
Rafts:
No
Supports:
No
Resolution:
200um
Infill:
20%
Notes:
Once printed, cut your desired length of PVC pipe (leave extra for inside the holders), press-fit it together, and mount using drywall screws.
Category: Household