Towel Holder using PVC pipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variable-size towel holder rack -- cut the PVC pipe to your desired length. In addition to two of the printed…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A variable-size towel holder rack -- cut the PVC pipe to your desired length.
In addition to two of the printed pieces, you'll need four drywall screws and a length of 1" schedule 40 PVC pipe. (Note that its outer diameter is roughly 33.5mm, not 1".)
Prints well without support or rafts. I recommend at least 20% infill for strength. I printed at 0.2mm layer height, but this shouldn't be especially important.
Print Settings
Printer:
Hictop Prusa Mendel i3 clone
Rafts:
No
Supports:
No
Resolution:
200um
Infill:
20%
Notes:
Once printed, cut your desired length of PVC pipe (leave extra for inside the holders), press-fit it together, and mount using drywall screws.
Category: Household