Harbor Freight dust collector exhaust to 6 inch adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple adapter to go from the Harbor Freight dust collector's rectangular exhaust port to a standard 6 inch dust hose
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The standard exhaust port on a Harbor Freight dust collector is a rectangular port that comes with a 5 inch adapter. Most dust collection systems use a standard 6 inch dust collection hose. This is a simple adapter that converts that rectangular exhaust port into a standard 6 inch port for connecting to most dust collection hoses. If you are planning on using this with the stock configuration, it likely would need to be printed out of PETG or maybe even nylon/ASA to deal with the impact of the chips hitting it. If you are using this with a cyclone system and are only getting fine particles thru the impeller, PLA would likely be just fine.
