1 / 1
Harbor Freight dust collector exhaust to 6 inch adapter — zdjęcie 1

Harbor Freight dust collector exhaust to 6 inch adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple adapter to go from the Harbor Freight dust collector's rectangular exhaust port to a standard 6 inch dust hose

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

The standard exhaust port on a Harbor Freight dust collector is a rectangular port that comes with a 5 inch adapter. Most dust collection systems use a standard 6 inch dust collection hose. This is a simple adapter that converts that rectangular exhaust port into a standard 6 inch port for connecting to most dust collection hoses. If you are planning on using this with the stock configuration, it likely would need to be printed out of PETG or maybe even nylon/ASA to deal with the impact of the chips hitting it. If you are using this with a cyclone system and are only getting fine particles thru the impeller, PLA would likely be just fine. 

Tagi