Uchwyt na poziomicę (Lewy/Prawy) / Spirit Level Wall Mount 30mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wytrzymały uchwyt na poziomicę (lewy i prawy) do 30 mm szerokości. Idealny na budowę i do warsztatu. Druk bez podpór.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 40
- Makes
- 1
- Views
- 148
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[PL] Zaprojektowałem ten zestaw uchwytów (lewy i prawy) dla kolegi pracującego na budowie, aby ułatwić mu bezpieczne przechowywanie i szybki dostęp do poziomicy. Gniazdo pomieści nawet szersze modele – zostało zaprojektowane pod poziomice o grubości do 30 mm. Uchwyt jest prosty, wytrzymały i gotowy do zamocowania na ścianie, tablicy narzędziowej lub w busie roboczym.
Dołączyłem również pliki źródłowe z programu Fusion 360 (.f3d), więc jeśli potrzebujesz dostosować projekt do własnych potrzeb (np. zmienić rozmiar otworów lub szerokość gniazda), droga wolna!
Wskazówki dotyczące druku:
Materiał: Zdecydowanie polecam PETG, ASA lub ABS. PLA może być zbyt kruche na warunki budowlane lub odkształcić się w gorącym samochodzie.
Ściany/Perametry: Ustaw co najmniej 3-4 obrysy (perimeters) i 20-30% wypełnienia (infill) typu Gyroid, aby zapewnić uchwytom odpowiednią sztywność i odporność na uderzenia.
Podpory: Model został zaprojektowany tak, aby drukował się całkowicie bez podpór.
Paczka zawiera pliki z modelami dla lewej i prawej strony oraz plik .f3d. Miłego drukowania i udanej pracy!
[EN] I designed this set of mounts (left and right) for a friend working in construction to help him keep his spirit level safe, organized, and easily accessible. The slot is spacious enough to accommodate thicker models, fitting spirit levels up to 30 mm wide. The mount is simple, rugged, and ready to be screwed onto a wall, tool board, or inside a work van.
I've also included the Fusion 360 source files (.f3d), so if you need to tweak the design to fit your specific needs (e.g., changing the hole sizing or the slot width), feel free to do so!
Printing Guidelines:
Material: I highly recommend using PETG, ASA, or ABS. PLA might be too brittle for a rough construction environment or warp inside a hot van.
Walls/Perimeters: Use at least 3-4 perimeters and 20-30% Gyroid infill to ensure the brackets are stiff and impact-resistant.
Supports: The model is designed to be completely support-free.
The files include both the left and right mounts as well as the .f3d source file. Happy printing and building!