towel rack bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
for mounting with tesa adhesive screws 2.5kg (77902-00002-00) there is 8cm between the wall to the center of the rod.…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
for mounting with tesa adhesive screws 2.5kg (77902-00002-00)
there is 8cm between the wall to the center of the rod.
I have uploaded two variants, Ø15mm and Ø20mm to deliver a more flush look for the Räcka curtain rod that i intended to use for this project.
the print is assymetrical and will need a mirrored partner.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
10%
Filament: devil design pla natural
Notes:
i printed with support in the indent for the anchor to ensure that the overhang would come out with minimal post processing.
Due to printing with support on the upper overhang i went through the cavity with a stubby knife to ensure good fitment between the anchor and the part.
How I Designed This
I wanted to print a strong bracket with more flair than just a wedge against the wall. To add strength in the direction of the adhesive anchor to the rod and back down to the bottom of the print i added in triangular support structures, this was also done to minimize the amount of material used on the print.
Category: Bathroom