Bosch VAC002 to 1-7/8" Shop Vac Hose Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Friction-fit adapter connecting the Bosch VAC002 dust port adapter to a standard 1-7/8" wet/dry shop vac hose
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The Bosch VAC002 adapter fits the ROS20VSC's dust ports great, but leaves you without a path to a standard shop vac hose. This adapter picks up where the VAC002 leaves off — friction fitting onto the VAC002 output on one end and accepting a standard 1-7/8" wet/dry vac hose on the other.
No clamps, no tape, no hardware store runs. Slide it on and start sanding.
Tested With:
RIDGID HD09001 9 Gal. 4.25 Peak HP NXT Shop Vacuum (1-7/8" locking hose)
Compatibility:
Bosch VAC002 dust port adapter
Standard 1-7/8" shop vac hose — should work with any wet/dry vac using the common 1-7/8" diameter
Connection Type: Friction fit on both ends
Print Settings:
Supports: None
Infill: 100%
Material: PLA works; PETG recommended for durability
Also posted on Maker World: https://makerworld.com/en/models/2618687-bosch-vac002-to-1-7-8-shop-vac-hose-adapter#profileId-2890074