1 / 3
Bosch VAC002 to 1-7/8" Shop Vac Hose Adapter — zdjęcie 1
1 / 3

Bosch VAC002 to 1-7/8" Shop Vac Hose Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Friction-fit adapter connecting the Bosch VAC002 dust port adapter to a standard 1-7/8" wet/dry shop vac hose

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

The Bosch VAC002 adapter fits the ROS20VSC's dust ports great, but leaves you without a path to a standard shop vac hose. This adapter picks up where the VAC002 leaves off — friction fitting onto the VAC002 output on one end and accepting a standard 1-7/8" wet/dry vac hose on the other.

No clamps, no tape, no hardware store runs. Slide it on and start sanding.

Tested With:

  • RIDGID HD09001 9 Gal. 4.25 Peak HP NXT Shop Vacuum (1-7/8" locking hose)

Compatibility:

  • Bosch VAC002 dust port adapter

  • Standard 1-7/8" shop vac hose — should work with any wet/dry vac using the common 1-7/8" diameter

Connection Type: Friction fit on both ends

Print Settings:

  • Supports: None

  • Infill: 100%

  • Material: PLA works; PETG recommended for durability

Also posted on Maker World: https://makerworld.com/en/models/2618687-bosch-vac002-to-1-7-8-shop-vac-hose-adapter#profileId-2890074

Tagi