Advantage arms kit (.22 kit that fits glock) 18 round mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Advantage arms (the .22 kit that fits glock) kit .22 mag (18 round mod)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 48
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
This will get Advantage arms Glock .22 kit mag to hold 18 rounds(only v7 is tested 100%). The only issue is the follower will not lock the slide open when mag is empty (V7 follower should fix this, but I have not tested it yet). Lower spring guide adds 2, Follower adds 2, mag plate adds 4. (the easy mod to only add 2 or 4,with my other kit, the base is a little tricky to install and very tricky to remove(pictures with the blue mag show how to install the extended base to the mag).
There is a locking tab to hold the base to the mag, I print it at 98%(to fit easy) and at 100% infill, it will need supports.
V8 is same just made to fit Advantage arms mag better(not tested yet).
I used a 0.04 feeler gauge to hold follower spring base in place as I slid mag base pad into place, a tap or two will get spring guide into place (you will need to break to remove).
If you want to just print the mag here is the mag
If you want to make your own springs
If you live in a (communist) state that has a limit of 10 rounds don't print this.