Whoop Canopy for Caddx Ant
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very easy to print canopy
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I really like this type of canopy. That's why I designed it.
Since I wanted to print in TPU, I designed it so that it can be printed flat and without supports.
The camera opening is 10.3mm and fits the CADDX antenna perfectly. At the end, there's a collar that grips behind the lens and holds the camera in place. This makes it a little tricky to get the lens through the opening and requires a bit of force and dexterity.
Since the cameras are all similar, it should also work for other models; you'll have to test that yourself.
In the rear section, there's a 5.1mm opening/guide for a VTX antenna.
At the "tail," there are various holes to adjust the camera angle.
This canopy is for frames with a 25.5 x 25.5mm hole spacing.
I printed it in TPU with a 0.2mm layer height and no supports.