Whoop Canopy for Caddx Ant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very easy to print canopy
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I really like this type of canopy. That's why I designed it.
Since I wanted to print in TPU, I designed it so that it can be printed flat and without supports.
The camera opening is 10.3mm and fits the CADDX antenna perfectly. At the end, there's a collar that grips behind the lens and holds the camera in place. This makes it a little tricky to get the lens through the opening and requires a bit of force and dexterity.
Since the cameras are all similar, it should also work for other models; you'll have to test that yourself.
In the rear section, there's a 5.1mm opening/guide for a VTX antenna.
At the "tail," there are various holes to adjust the camera angle.
This canopy is for frames with a 25.5 x 25.5mm hole spacing.
I printed it in TPU with a 0.2mm layer height and no supports.