1 / 3
DIY Flat-head earbud (15.4mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FOR FLAT HEAD DRIVERS ONLY IN THE 15.4MM CATEGORY!! A 3d printable earbud! For DIYers in the earbud community.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 124
- Makes
- 0
- Views
- 955
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
THIS IS FOR FLAT HEAD DRIVERS ONLY!!!
Requirements:
- 15.4mm driver
- Cable to attach the driver to
- Tuning foam
- Glue/Resin (to attach the driver skirting to the shell)
A 3D printable earbud shell that was based off the Qian39. Modified later with similar already existing shells such as the mx500 and my own alterations. If you have no idea what this is, its a classic earbud! With massive communities behind making their own. Come join us!
(recc to print on the step facing up with a 0.4mm nozzle)