Counting matching models…
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Say goodbye to dirty earbuds with the Earbuds Cleaner Tool ! This dual-sided design features a brush-like surface on one end for removing earwax and…
A remix of the Lightning connector based version from @stripetuning_193054 to accept the new USB-C connector.
A simple and fast print to help clean earbuds and phone charging ports. It features a textured side to help with grip, and the tools on each side are the perfect size for cleaning an earbud or getting dust out of a phone's charging port.…
if for some reason the control panel doesn't line up correctly you can cut a small bit off the bottom and sand it flat. i will be editing this in the future
This is an improved version of my previous model https://www.printables.com/model/659917-wired-earbuds-holdercase. Has a better grip, but has the same dimensions as the previous one. Ideal to store you wired eardbuds. Printed in PLA…
Do you have a tangled mess of wired earbuds lying around? This is the solution. This is a wired earbud holder. This earbud holder is for storing earbuds long-term. If you would like them or short term solution, try the other Wired Earbud…
The clip is designed to keep headphone/earbud wires planted to your shirt which is useful for running or other activities. Designed this particularly for running since the bouncing of the wires was really distracting. The clip can be…
The core can be printed without support without issues. If you have trouble getting it to stick to the bed try printing it upside down, the overhang will be a bit worse but will probably print ok with good cooling. The shells however…
This is a Apple Earbud holder, with a little slot to hold the 3.5mm to lightning adapter. update: v4 adds a hole so that both lightning and older 3.5mm jack versions will fit Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts:…
This is a model I designed years ago to keep my cheap earbuds from tangling up in my backpack. This has been rattling around in my front pocket for years and still going strong. Just place the buds and twist away! It prints in place and…
I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…
This is a earbud cleaner tool. It has a curved hook on one side to remove any debris that may be on your earbuds. It has a brush/scraper on the other side. This works great with AirPods from any generation and most other earbuds. PRINTS…
I tried to find earbud case, but finally designed my own. Print without supports. Please share you makes and consider donation. https://paypal.me/novatormaker https://revolut.me/onovator
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) These simple earbud wraps provide a…
I wanted a way to quickly store my wired Apple earbuds in a way that I wouldn't end up with tangled wires. Also when not in use the gadget must be small and flat. There are already several designs, but none satisfied me completely, so I…
this is an organizer for earbuds, designed around the truthear hola earbuds, though it might work for any earbud. it is inspired by “earbud wrap” on printables. The wrap is fastened in the middle, rather than the bottom, with a rut in the…
Remix of the earbud case version by Mack21: https://www.thingiverse.com/thing:4765362 This version is 1 centimeter higher and has a bottom without a fillet for easier printing. No support needed. Enjoy!
A remix of the USB-C connector based version from @ChrisBoorman_136327.
Do you prefer wired earbuds because of their crisp mic recordings but hate the tangles? Search no more! This holder is designed to keep the earbuds and the mic in the central cavity, protecting them from impact while keeping the wire…
My son have little care about his earbuds, so the cable tends to break easy. I designed this pocket holder to roll the cable quick and avoid knots and tight curves. Just put the center of the cable in the slot, and turn the inner roll.…
I recently went to treat myself a little bit and spent a little extra money for a new set of bluetooth earbuds. These WF-1000XM4 earbuds are amazing… and have the price tag to match (for a relatively broke university student, at least…
This is a button cover for the Sony WF-C500 earbuds. The cover fits over the existing button and prevents accidental presses, while still allowing it to be pressed with your finger. I used small strips of 3M double face clear tape to hold…
Slightly taller (more area to wrap around) and added extra notches in the center. Overall model is 2cm tall, including the 3mm bottom lip. No supports needed.
Hi! This model serves as a compact carrying case for a pair of earbuds or in ear monitors. It is very tough and can withstand decent impact. I use it to store my racing earbuds, as they are relatively short and small, but not at all…
It is a small container where you can put earbuds or other little things. The inner diameter is 26 mm, and the height is 90 mm.
I made some edits to the original design. This should work a lot better. I do recommend some support for the inside. Category: Audio
Context Maybe my ears have an unusual shape, maybe I'm asking too much: I was unable to run without having to reposition my earbuds every 5 minutes. Since tapping/pressing the earbud is sending a pause command, it was annoying. I decided…
Do you have a tangled mess of wired earbuds lying around? This is the solution. This is a wired earbud holder. Print Instructions Material: PLA or PETG Supports: No Orientation: Place the bottom flat on the build surface Usage All you…
Finally do sports without worrying for your earbuds falling. Printed on PETG, about 15 minutes print. Make sure to reflect the model on the X axis horizontally so you can print each side. They snap from the outside into position. For more…
BTS earphones holder Easy to print, no supports needed. @3DPrintBunny If you like KPop join my 3d printing KPop thingiverse group here: https://www.thingiverse.com/groups/kpop-3d-printing
For those of us still too cheap to buy wireless headphones/earbuds. Start with the earbuds in the center and position the chords through one of the openings then begin winding. Once short enough to reach across, bring the connector in and…
Wanted a container/case for multiple KZ ZSN style earbuds that I had. This thing is modular, you can print the case, the slide cover, and however many earbud holders you need. Any spare compartments can be used to store the removeable…
Xiaomi Mi Earbuds Basic 2 True Wireless ear hook so they don't fall out of your ear. They can even be placed inside the charging box (but you need to take them off to charge. Printed in ABS. 0.2 layer height. It also let me use a slightly…
Portable(?) 6 pair of earbuds storage case or tray for those into tip-rolling. The pillar is 5.3mm, each bud space is 15mm. Size is 96x36x12mm and 93x33x9mm for box and tray respectively. The tolerant between the container and the cap is…
Uses this connector: https://www.amazon.com/gp/product/B078M793HW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This print is a simple, two part storage container to protect your earbuds' silicone tips. There are two sizes available: one that can hold 6 tips and one that can hold 8. The support pegs also have two sizes: a standard option and a…
EDIT: Added Fusion360 file or easier remixing, internal diameter and lenght are parametric. Heads up, the parameter for internal diameter should be set 2mm wider than the actual result, I made the inner wall 1mm thicker at one point so…
it is what it sounds like. found it on thingiverse and thought it needed to be on here as i didn' find it on printables.
You can stick the holder with double-sided adhesive tape
My initial design caused too much echoing, so here is a version that seems to give a slight white noise effect at first, then just dampening. There are two versions, the first model has a short stem to the fitted earbud. The second has a…
https://youtu.be/RSj_baYf2_A We were inspired by Elf Earbuds - we designed our own and made them so you can slip them on your existing earbuds. Guide: https://learn.adafruit.com/elf-ears These can fit most earbuds with a similar style.…
This is my very first 100% self designed, edited, printed item. It is certainly a work in progress but feel free to modify it for your own uses! This Earbud / Headphone cable wrap is convenient and makes a statement with or without your…
THIS IS FOR FLAT HEAD DRIVERS ONLY!!! Requirements: 15.4mm driver Cable to attach the driver to Tuning foam Glue/Resin (to attach the driver skirting to the shell) A 3D printable earbud shell that was based off the Qian39. Modified later…
This was a design I had drafted after seeing Tonitom AirPods Pro Case Molle Clip. This is for the first generation Skullcandy Dime Earbuds case. I did not duplicate the design for the Molle Clip from the original. As stated in the…
Uses this 90 degree connector: https://www.amazon.com/gp/product/B078M793HW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It gets pretty hard getting the earwax out of your earbuds some times and it would be nice if there was a tool for doing it. Well worry no more because here it is! This earbud cleaning tool is super easy to print, and it takes only a few…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- I don't like the earbuds that comes with the Samsung Galaxy…
Can someone with a Model Y try this out to see if the width is the same as the Model 3?
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This earbud wrap provides a convenient…
This is a simple earbud holder to make your earbuds look nicer on your desk. It will give them a cleaner look, than just throwed down. It will take up very little space. This print does NOT need supports.
Use any material , on ay printer . I have used 0.4 nozzel , 0.2 step , with PLA
Remixed JBL tune flex holder with Ikea Skadis peg board "connector"
I liked this earbud holder because of the quick release feature: the last loop with the audio jack holds the other loops in place. Release it, and you can release all the other loops instantly. I redid the original as a commented,…
This was my first ever original design for 3D printing. It turned out to be more useful than I expected. Great for young children to hold on to their “cable lizard” and their earbuds. :) Scale it up for some interesting wall art or…
An F-15 Themed charging station. This station supports most cell phones, as well as apple watches and some galaxy watch models. The tower was made to charge galaxy buds, however it also works with AirPods, and possibly other earbud…
I recently acquired the Playstation Pulse Explore earbuds but only really use them when playing on the PS5. I wanted a safe location to mount the case to. Thus, this holder was born! Recommended settings: 10% Infill (Gyroid or Adaptive)…
Was getting annoyed by how my earbud wires were constantly getting caught in various places and being a pain in general when I was working at my desk, so I made this to try to keep it in place. The idea was basically a simple clip that I…
Replacement tips for lost or worn out earbuds. I decided to try printing them from PLA and since they would not be flexible, I made them slightly smaller. This model has an outside diameter of 10.5mm. These were just comfortable for me…
Use TPU The plug should be pressed through (it's separate to remove the need for support) Press the cable into the channel on each side Support should not be needed You could print the main body in PLA/PETG, but the plug really needs to…
A rough copy of the MX-500 shell. Recommended to use a 0.2mm nozzle, but you should be OK with a 0.4mm. The default orientation is to print the shells on their backs as this minimises the need for supports, but printing them the other way…
I don't like things in my pockets, exspecially large earphone pases. The case has holes built into it for the USB Ccharging port and the reset button. Use double sided tape on the front and back of the case to hold it inside the holder.
deck holder for IEMs the ones I own are chu 2 but should fit other IEMs
I did something pretty simple...I took two designs, slapped them together in Tinkercad, and made this. This phone stand also has a holder for earbuds attached to it. I use it to prop up my Pixel 6a and hold my Pixel Buds so I won't lose…
What makes it special My earbuds used to end up loose at the bottom of my bag, so I made a holder I could actually grab on the go. It is a simple print, and I use it all the time when I travel with my earbuds. The shape is modern, with a…
Earbud clips. Fits to PHILIPS SHB5250. Print instructions Category: Audio Summary Earbud clips. Fits to PHILIPS SHB5250. Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0,06 Infill: 100%
I flipped the apple watch charger to the opposite side, doubled up the phone holder and added @Charleszard's Bose Quiet Earbuds II charger. 25% infill (support cubic) Supports: snug, 0.2, concentric
Another earbud cable wrapper. Designed by my daughter in tinkercad and for sale at a school craft fundraiser.
This is my second Thingi created from scratch. Enjoy and feel free to comment if you find something wrong with the STL, I am still new to all this. :) Print instructions Category: Audio Summary This is my second Thingi created from…
Small box with sliding lid to store earbuds. No support needed when printing.
A compact and practical phone stand organizer designed to keep your desk clean and your essentials within reach.
Fast easy print that works well, made in my PLTW engineering class.
About This gridfinity holder is designed for the earbuds case of the QCY MeloBuds Pro. Print instructions Based on one print run: PLA, 0.2 mm, no support.
This model is designed to hold 5 pairs of earbud tips for the AXIL XCOR earbuds and fit into the zipper carrying case next to the USB cable. Two models, with source, one with chamfered earbud tip holders, the other without. I provided the…
Finally a proper 1x2x9 Gridfinity storage for your Redmi Active 4 case! Should work with any pebble like case no larger than 64x25x54mm although the fit may not be as snug. Also with the remaining space, pencil holders with an extra tip…
A simple gridfinity block to hold my earbuds. Not a tight fit so it may work for a variety of Earbud cases. Specifically I modeled this for a TOZO NC9 ear buds. Released this incase it works for anyone else.
I was having trouble with the right angles of the original base snapping off with my supports when printing. I had gone through three different attempts before deciding to just remix this so that it doesn't require supports. I gave it a…
This is another earbud/earphone wrapper created for a school craft fair. This one is a dragon design.
Remix of a Remix - Stick it to a wall or something - I put mine under my desk
Remix of Galaxy Buds case with a touch of Miffy on the top, the ears add a extra functionally of serving as a lever.
REMIX of the model published by D2mian: https://www.printables.com/model/260729-earpod-headphone-case-apple No supports required. Printed using ASA filament on my Creality K1C.
A 2in1 Mini Cleaning Tool for USB Ports, Earbuds, or anything small. Measurements: 13x59x1mm
Description I made these TPU earbud/earphone running fins/wings so they would not fall out of my ears anymore and I am very pleased with how they work for me. The inner diameter of the hole is 18mm which is perfect fit for MI airdots.…
Design: Charging station (wired – USB C plug) for in-ear buds in their pod. The containing pods for the in-ear buds are very smooth and all-rounded to be ergonomic to be comfortably stored in your pocket but they can easily slip out of…
Print-in-Place Box for Holding Earbuds or other small items Replacement Case if you lost the cse that came with your Earbuds Uses 6mm x 3mm Magnets to keep shut (try using fewer magnets if case shuts too strongly) Multiple Models Included…
In this remix more room was added in the spool while also increasing strength at attachment point at base to decrease potential breakage. Height was increased in wire channel to accommodate both the aux plug and earbud wires. Note: photos…
Made a simple holder for my Bose QuietComfort Earbuds in a project to organize some of the things I have around my office. Printed with PLA, 0% infill, 0 solid bottom layers. No raft or brim needed on my FlashForge.
Design: Adapter designed to mount perfectly to the Plantronics Voyager PLT 5200 headset and to interface with a standard soft in-ear rubber earbud (plug). Design software: FreeCAD Dimensions: envelope is about 10mm long x 6mm diameter.…
The charging case for "JLAB GO Air True Wireless Earbuds" doesn't have a lid, and the earbuds pop out easily if jarred. I guess they're meant to sit on your desk, not be taken with you, despite being called "GO". I designed this to snap…
Remixed model to suit: Original Oppo MH135 wired headphones with a 3.5mm jack. In the photos I have printed in PLA with a brim, no supports, standing upright - Super fast 0.3mm for a prototype. PETG without a brim or supports is printing…
A butterfly headphone cord wrapper. Designed in TinkerCAD to sell at a school craft fair.
I made this to keep the earbuds on my neck better when I'm at work or the gym.. they would always fall to one side and then off my neck all together. this clip keeps the earbud wire in one spot, mostly, and is MUCH better at staying in…
I imported the original STL into Fusion 360, took some measurements, adjusted the sizes for the case of the TW4, which is a bit smaller than previous models. I also made the hole for the USB plug a bit smaller to get a press-fit. I had to…
wall earbuds holder (Redmi buds 3 pro) + parametric
Made to store Skullcandy earbuds container and to fit in the Honeycomb storage wall by RostaP Includes charging cutout
Tried making a little clip-like attachment that I could attach to the zipper of my jacket and hold my earbud wire in place so that it doesn't get caught on things or swing around. The actual clip itself is somewhat effective (although I'm…
Cable organizer made like a small drawer box. Recommend printing with support for some small details like the rails on the bottom part. Print the lid upside down.
===UPDATE February 7, 2024 Print Profile now available: HERE ===ORIGINAL POST Here's an Wyze Earbuds holder for the Honeycomb Storage Wall (HSW). The inserts only have 3 tabs so the can be removed and relocated easily. Printed upside down…
Printed at .24mm height
