Earbuds USB-C Desk Charging Station
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.44 – €9.09 net (excluding VAT)
For file: In-Ear_Buds_Station_v1_30pc_0.15mm_PLA_207C_9h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.26 excluding VAT (range midpoint).
- Weight reported by the author
- 81 g
- Print time reported by the author
- 9.34 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Earbuds desk holder and charging station (wired USB C). Designed for A90 Pro earbuds, works for similar models.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 53
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Design:
Charging station (wired – USB C plug) for in-ear buds in their pod. The containing pods for the in-ear buds are very smooth and all-rounded to be ergonomic to be comfortably stored in your pocket but they can easily slip out of hands when you are often opening them to take the buds out or putting them back in. I therefore designed a station for desks where the pod stands upright, it can be connected via USB C to charge and the buds can be easily extracted and put back in.
Designed for my Btootos A90 Pro earbuds but it should fit for different brands / models. Dimensions are provided to check if it would fit for different earbuds models. If you want to have a customized size of the holder, please like the model, download it and send me a message. I will be glad to help!
I also uploaded a precise model of an USB-C standard male plug and a very accurate model of the A90 Pro earbuds.
Design software: FreeCAD
Dimensions:
See picture P3
Printing Details:
Printer: Prusa MINI+
Material: Prusament PLA, printed at 207°C (best compromise for my printer and settings)
Infill: 30%
Nozzle: 0.4mm
Layer Height: 0.15mm (Quality on the Prusa MINI+)
Supports: Not needed
Glue: Not needed
Print and Enjoy!
Assembly: To use the holder as a charger Fit your USB cable in the bottom pocket and connect the pod from the top (see pictures).