1 / 3
ThinkNode M1/M5 webbing mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This is a quick release mount to attach a Elecrow ThinkNode M1/M5 to 25mm webbing.
Build notes
You will need two M2*4mm hex bolts to attach the back plate to the device.
PETG is preferable to allow for a bit of flex on the release tab.
Sanding may be required if the fit is too tight.