1 / 1
Garbage Can Replacement Wheel (Rubbermaid)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement wheel for a Rubbermaid garbage can
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The wheel on my garbage can broke, so I drew up a new one and printed it, and it works well. I used PETG and hit the outside of the wheel with some resin to help it last longer. It does exactly what it should. I ran out of black filament mid-print and finished with orange. It looks silly, but it is functional. TPU or ASA may be good choices, as well.
Prusa MK3.9 - 0.4 nozzle - 0.2mm layer height - 5-10% infill - 3 perimeters
I used 15% infill, and it was definitely overkill. If I need to print another one, I will drop that down into the 5-10% range.