FLIRC raspberry pi case cover and base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the cracked or aged FLIRC raspberry pi case top cover and base. Base is designed to use 6mm rubber feet
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
The original case cover and base may become sticky or develop cracks after years of use. These parts are designed as replacements.
Differences from the original design:
The top cover snap hooks have been reinforced to improve durability when 3D printed.
The base no longer includes cable slots and instead features additional support fins for increased strength.
The rubber feet indentation is modified for easier to find 6mm rubber feet. Original feet diameter is 6.7mm
Printing tips:
Due to material shrinkage, slight scaling may be required in your slicer. For example, when printing with PETG, a scale of 100.3% provided a precise fit in my tests.