1 / 1
Navigation holder for Yamaha Tenere 700 - Bepocam — image 1

Navigation holder for Yamaha Tenere 700 - Bepocam

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a holder for a Bepocam navi for the Yamaha Tenere 700

Rating
0 / 5
Likes
3
Downloads
33
Makes
0
Views
313
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

This is a holder for a Bepocam navi for the Yamaha Tenere 700.

The unit features GPS, optionally tyre pressure and temperature and optionally two cameras for front and back: https://de.aliexpress.com/i/1005010477994256.html

The photos show my test prints with PLA. I already printed in black ASA, but didn't mount that yet.

Print it with the maximum layer height your printer/nozzle supports and at least 6 Perimeters. If you are concerned about the surface finish, ASA can be vapor-smoothed with acetone and that also increases layer adhesion.

In extra hardware you will need:

  • 5 * M heaset inserts

  • 9 * M3 washer

  • optionally 9 * M3 locking washers between screwhead & washer

  • 1 * self-locking M3 nut

  • 4 * M3x12

  • 4 * M3x16 (?) 

  • 1 * M3x25

  • optionally threadlocker

I put a 1.6 mm thick acrylic foam tape around the bar to dampen vibrations.

Tags