Self-Watering Pot (Size L) - Hourglass Series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Self-Watering Pot with level indicator and owerflow control
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Experience the perfect balance of aesthetics and plant care. This Size M self-watering pot is part of the "Hourglass" series, designed for those who want a reliable, "set-and-forget" watering system for their indoor or outdoor plants.
Featuring a sophisticated Wick + Float-Valve system, this planter ensures your plants receive the exact amount of moisture they need. The integrated float-valve acts as a level controller, preventing reservoir overfilling and protecting roots from rot (submergence).
Key Features:
Bionic Structural Design: The decorative relief isn't just for looks—it acts as a series of reinforcement ribs, significantly increasing the pot's structural rigidity.
Smart Water Control: Includes a reservoir and a float-valve indicator to monitor water levels at a glance.
Print-Optimized: Designed to be printed on any FDM printer (even with small beds) without any supports.
Large Capacity: 2.5L soil volume with a generous 1L water reservoir.
Full Documentation: Comes with a detailed User Manual covering assembly and usage.
Technical Specifications:
Size: Medium (L)
Dimensions: 180mm (D) x 170mm (H)
Soil Volume: ~2.5Liters
Reservoir Volume: ~1000 ml
Placement: Indoor / Outdoor
Setting | Recommended Value |
Nozzle Diameter | 0.4 mm |
Layer Height | 0.15 mm (Quality) |
Wall Line Count | Min. 3 (Crucial for watertightness) |
Top/Bottom Layers | 4–5 |
Infill | 0% (Not required) |
Print Speed | 40–60 mm/s |
Important for Watertightness:
Ensure at least 3 perimeters (walls).
Print at 100% flow rate.
Material Compatibility: PETG, PLA+, or ASA are recommended due to low water absorption. Avoid standard PLA for long-term water contact.
Adhesion (for small parts like Float-Valve/Indicator):
Use a Brim (2mm width).
Enable Retraction.
Cooling: ON after 2-3 layers.
Assembly & Tuning Tips:
Orientation: Print all parts upright as provided.
Test: Before planting, perform a quick watertightness test with the reservoir.
Wick: Use a high-quality cotton or synthetic wick for optimal capillary action.