1 / 7
Self-Watering Pot (Size L) - Hourglass Series — zdjęcie 1
1 / 7

Self-Watering Pot (Size L) - Hourglass Series

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Self-Watering Pot with level indicator and owerflow control

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Experience the perfect balance of aesthetics and plant care. This Size M self-watering pot is part of the "Hourglass" series, designed for those who want a reliable, "set-and-forget" watering system for their indoor or outdoor plants.

Featuring a sophisticated Wick + Float-Valve system, this planter ensures your plants receive the exact amount of moisture they need. The integrated float-valve acts as a level controller, preventing reservoir overfilling and protecting roots from rot (submergence).

Key Features:

  • Bionic Structural Design: The decorative relief isn't just for looks—it acts as a series of reinforcement ribs, significantly increasing the pot's structural rigidity.

  • Smart Water Control: Includes a reservoir and a float-valve indicator to monitor water levels at a glance.

  • Print-Optimized: Designed to be printed on any FDM printer (even with small beds) without any supports.

  • Large Capacity: 2.5L soil volume with a generous 1L water reservoir.

  • Full Documentation: Comes with a detailed User Manual covering assembly and usage.

Technical Specifications:

  • Size: Medium (L)

  • Dimensions: 180mm (D) x 170mm (H)

  • Soil Volume: ~2.5Liters

  • Reservoir Volume: ~1000 ml

  • Placement: Indoor / Outdoor

Setting

Recommended Value

Nozzle Diameter

0.4 mm

Layer Height

0.15 mm (Quality)

Wall Line Count

Min. 3 (Crucial for watertightness)

Top/Bottom Layers

4–5

Infill

0% (Not required)

Print Speed

40–60 mm/s

Important for Watertightness:

  • Ensure at least 3 perimeters (walls).

  • Print at 100% flow rate.

  • Material Compatibility: PETG, PLA+, or ASA are recommended due to low water absorption. Avoid standard PLA for long-term water contact.

Adhesion (for small parts like Float-Valve/Indicator):

  • Use a Brim (2mm width).

  • Enable Retraction.

  • Cooling: ON after 2-3 layers.


Assembly & Tuning Tips:

  1. Orientation: Print all parts upright as provided.

  2. Test: Before planting, perform a quick watertightness test with the reservoir.

  3. Wick: Use a high-quality cotton or synthetic wick for optimal capillary action.

Tagi