Cable Retainer (25mm and 30mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
25mm (~1") and 30mm square cable retainers. For scale, the image of the white one with two sets of wrapped cables in…
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 1
- Views
- 143
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
25mm (~1") and 30mm square cable retainers. For scale, the image of the white one with two sets of wrapped cables in it is a 30mm version and that has two PC audio cables (the kind with TRS connectors), an HDMI cable, a standard PC power cable, and an 18/2 cord that powers my speakers.
The slot in the top allows cables to be added or removed at will instead of needing to thread them through one guide/retainer at a time.
The hole in the front allows a screw to be driven in without needing to use any strange angles and is sufficiently large for a standard 1/4" hex screwdriver.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.3mm layers
Infill:
This prints almost solid because it's thin.
Filament: Any Any Match your walls
Notes:
If your workflow allows variable layer height and you're printing this out of PETG, you might try reducing layer height towards the "tops" of the holes to make sure they come out cleanly.
Category: Organization