Desktop Fan- Adjustable Tabletop Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small fan for blowing away fumes, cooling hot glue, or other uses. Uses a 60x60x15 or 60x60x20 DC fan.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 34
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple fan made with a 60x60x15/60x60x20 fan, screws, and a few printed parts. It can be used for blowing away fumes, cooling hot glue, or other uses.
BOM:
1x 60x60x15mm or 60x60x20 DC fan (common on 3d printers, pcs)
6x M4x25 Screws
1x Power supply (use appropriate voltage/current for your fan.
Optional: 1x Power switch
Assembly:
Attach the two brackets to both side of the fan and affix them with 4 screws. Use glue or nuts as needed to sercue the screws. Also glue the sides of the fan to the brackets, as the screws may not be enough.
Stand the two towers upright and mount the fan/bracket assembly between them
Wire the fan to the power supply/switch and turn it on
Enjoy your new fan!
Thank you to Kaloyan Georgiev on GrabCAD for the reference model: https://grabcad.com/library/sunon-maglev-fan-60x60x15-mm-1