Sliding robe door safety latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secures doors from sliding open or being opened by toddlers.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 15
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
This is a print-in-place built-in robe door lock. There is the locking mechanism that unfolds into a right angled blocker, and a base. The base allows the mechanism to be attached to the door with double sided tape. I printed this with PETG and glued together with Plumma's Type P clear PVC glue. You need to used supports for printing due to latching mechanism (over hangs). Also you need 3.2mm diameter pins approx 15mm long. These engage the locking slots. I used some concrete nails (exactly 3.2mm diameter) to make the pins (just use a Dremel to cut them to length). Still totally toddler proof, just make sure its attached high enough on the door so its out of reach.