1 / 1
Reducing Fitting Male-Male M15x1.5 to G1/2 BSP — Plumbing Adapter — image 1

Reducing Fitting Male-Male M15x1.5 to G1/2 BSP — Plumbing Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

M15x1.5 to G1/2 BSP Male-Male Plumbing Adapter

Rating
0 / 5
Likes
0
Downloads
17
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Public Domain

This reducing fitting allows connecting two pipes with different thread standards: M15x1.5 metric thread on one side and G1/2 BSP (British Standard Pipe Parallel) on the other. Designed for shower systems, thermostatic valves, or any plumbing application requiring an adaptation between these two common standards.

Features

  • Male-male adapter (external threads on both sides)

  • Side 1: M15x1.5 metric thread — Ø15mm outer diameter, 10mm thread length

  • Side 2: G1/2  BSP parallel thread — Ø20.955mm outer diameter, 10mm thread length

  • Chamfered entry on both ends for smooth thread engagement

  • 3mm wall thickness for structural integrity

  • Total length: 30mm

  • Internal bore: 9mm (M15 side) transitioning to ~15mm (G1/2 side)

Print Settings

  • Material: PETG (recommended — food-safe grades available, good chemical resistance)

  • Layer height: 0.15–0.2mm

  • Perimeters/Walls: 6 minimum (critical for pressure resistance)

  • Infill: 100%

  • Supports: No

  • Orientation: Print horizontally (axis along bed) for optimal layer adhesion on threads

Post-Processing Tips

  • Thread the M15 and G1/2 sides with a die after printing for clean thread profiles

  • Thermal annealing recommended: place in oven at 60°C for 1 hour to relieve internal stresses

  • Use PTFE tape on threads for a watertight seal

  • Tested for hot water applications up to 45°C

Use Case Designed for domestic hot water systems (37–45°C). Compatible with standard plumbing fixtures using M15x1.5 and G1/2 BSP threads.

In my case, I created this piece to replace a broken part (from kit 1015049990) in my Grohe shower, as it is almost impossible to purchase without being a professional plumber.

This is a custom, non-official part designed for compatibility with Grohe showers. It is not affiliated with or endorsed by Grohe.

Tags