Reducing Fitting Male-Male M15x1.5 to G1/2 BSP — Plumbing Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M15x1.5 to G1/2 BSP Male-Male Plumbing Adapter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
This reducing fitting allows connecting two pipes with different thread standards: M15x1.5 metric thread on one side and G1/2 BSP (British Standard Pipe Parallel) on the other. Designed for shower systems, thermostatic valves, or any plumbing application requiring an adaptation between these two common standards.
Features
Male-male adapter (external threads on both sides)
Side 1: M15x1.5 metric thread — Ø15mm outer diameter, 10mm thread length
Side 2: G1/2 BSP parallel thread — Ø20.955mm outer diameter, 10mm thread length
Chamfered entry on both ends for smooth thread engagement
3mm wall thickness for structural integrity
Total length: 30mm
Internal bore: 9mm (M15 side) transitioning to ~15mm (G1/2 side)
Print Settings
Material: PETG (recommended — food-safe grades available, good chemical resistance)
Layer height: 0.15–0.2mm
Perimeters/Walls: 6 minimum (critical for pressure resistance)
Infill: 100%
Supports: No
Orientation: Print horizontally (axis along bed) for optimal layer adhesion on threads
Post-Processing Tips
Thread the M15 and G1/2 sides with a die after printing for clean thread profiles
Thermal annealing recommended: place in oven at 60°C for 1 hour to relieve internal stresses
Use PTFE tape on threads for a watertight seal
Tested for hot water applications up to 45°C
Use Case Designed for domestic hot water systems (37–45°C). Compatible with standard plumbing fixtures using M15x1.5 and G1/2 BSP threads.
In my case, I created this piece to replace a broken part (from kit 1015049990) in my Grohe shower, as it is almost impossible to purchase without being a professional plumber.
This is a custom, non-official part designed for compatibility with Grohe showers. It is not affiliated with or endorsed by Grohe.