USB Flash Drive Disk Module DOM Magnetic Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
USB Flash Drive Disk Module DOM Magnetic Holder. Uses 7x 6x2mm magnets, M3 Screw, and Nut.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I purchased a DOM for my Unraid server but didn’t have enough clearance to install it without removing the M.2 heatsink. After getting an extension, I needed a way to secure it in place—hence this solution to mount it to the chassis. A pause is required to insert the nut and magnets while printing. For 0.16mm layer height, this should be at layer 16. I'll list the hardware and my print settings, if you wish to use something else, let me know or remix, I'll include STEP files.
Hardware
6x2 Magnets https://a.co/d/03bKpDmc
M3 Nut and Screw https://a.co/d/02MucUYb
Print Settings
Filament: PETG
Supports: No
Pause: Yes
Wall Loops: 3
Enjoy!