Nitehawk36 Sherpa Mini Mount (4/6 point)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for NH36 on Sherpa that uses all the attachments
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
BOM
2x 18mm standoffs
2x 20mm standoffs
4x voron spec m3 heatset
6x bolts
2x 1/8" zip ties
Print on back. Print it strong, don't skimp. Voron or monolith settings.
On the sherpa side, just add 2-4mm to the bolts so they stick out the back of the motor and the extruder. I kept the heatsets on the bottom but you likely could edit those out and just thread into the standoffs.
Heatsets go for the lower board mount bolts. All other bolts go into the standoffs. Shorter standoffs on top, for the motor flanges. This assumes 2mm thick, you may need to adjust standoff length or use washer if yours are different.