ADV Pillion Peg End Stops
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pillion Peg stops for ADV350
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Made to augment the pillion pegs on a Honda ADV350 (may well fit the rear pegs on other Honda’s like the Forse350 – but I have not verified this). The retainer is simply intended to provide a small end stop for the pillions foot, this to give greater confidence for the passenger. When fitted the pegs still fold as normal and the space for feet inside the retainer has been increased by about 5%
This is a simple build made from 95A TPU with a ‘light’ 15% in-fill. Prints with the foot retainer on the print bed. No supports required. Approx print time 6h per peg.
Hardware: 6x 30mm 3mm hex bolts, plus 6 x 3mm nylock nuts, plus 12 x 3mm (8mm external dia) washers. Bolts cut off after compression