2,927 models
I’m deeply honored that my design was been nominated for the awards! Consider following me on Instagram (@SMACKMAX_). I try to post all of my prints, renders, and animations to build a portfolio of my projects…
Print approx. €3.07–€3.76 excl. taxPreliminary estimate for one variant
A functional Gameboy Advanced Cartridge. Modeled in OpenSCAD. Test fit in a GBA, GBA SP, and DS Lite with Mario Kart. Print with build plate supports.
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
Let's do multicolour now. Spider-Man 5 colours with MMU2S. Print at least 150mm height. Gcode spidermanps4advancedsuit-mc-basered_icz_02mm_pla_mk3smmu2s_2d7h43m.gcode provided by Ceji3D https://www.instagram.com/ceji3d/ Gcode for 2x…
Print approx. €47.06–€57.52 excl. taxPreliminary estimate for one variant
Prusa supplies linear advance gcode for the MK series printers, but not for the Mini, so I decided to build one to help dial in a problem I've been having. The GCode is generated from Marlin's website found here:…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
All printable parts for your Advanced Filtration System Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with Advanced Filtration System. All of the add-ons and community models can be found here . Print…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for PETGSource material: PET
This is the requiem arrow from Jojo's Bizarre Adventure Part 5: Golden Wind used by Giorno Giovanna
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Rework of an older model I made. Comes separated in several parts that snap fit together (with the exception of the screen and antenna parts, these must be glued to the body), so it can be post-processed and painted easier. Made in Cinema…
Print approx. €4.44–€5.42 excl. taxPreliminary estimate for one variant
The Steel Ball should be rotating in your palm! In this model, this is achieved with a single 608 bearing located at its center. Note: if this seems like fun to you, you might also like the seasonal Easter Steel Egg . Printing The whole…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
Available in both branded and unbranded versions, this case offers a protective layer in both a snug and padded variant. The padded version accommodates 1 mm EVA foam lining for added protection. To ensure a flush fit, the latches have…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This gcode uses the following parameters: Nozzle temp: 210 Bed temp: 60 Input Shaper: off Pressure Advance Factor: 0.1 until 0.5, steps 0.02 Pressure Advance Smooth Factor: 0.06 I like the print tuning guide from Andrew Ellis and tried…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Hello 3D-Friends, this is a ready to print gcode for Prusa XL to calibrate the k-factor for pressure advance (linear advance) for PLA. It was created with Prusa Slicer 2.8.1 and this great site:…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Tool to help check chain tension and wear as instructed in the KTM 790/890 Adventure owners manual. The extruded side is 3.5mm thick (middle of the acceptable range 2-5mm) and 25mm wide. The bottom is grooved to check chain wear and…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
Having troubles to print the official case? Is your built volume to small? Just wanted something fancier? Try the Open MVS advanced case! Design goals of this case exact fit for the OMVS kit to consolize a Neo Geo MV1C printable on a…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
About: Come on grab your friends its Adventure Time! Dust off your printers, bust out the your red filament and get it going with this new GOLB demon print! Made for Adventure Time fans, toy enthusiasts and Halloween decorators its scary…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Just finished season two of JoJo's bizzare adventure. Loved Iggy, he is favourite mutt! So I made a sculpture of him you can print. :)
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Print approx. €7.68–€9.39 excl. taxPreliminary estimate for one variant
I printed this model in one go on my Ender 3 Max using custom organic supports made in PrusaSlicer 2.7.1 The included 3MF file will allow you to edit the settings (in PrusaSlicer, haven't tested it in any other slicers), and the gcode is…
Print approx. €9.54–€11.66 excl. taxPreliminary estimate for one variant
I tested the Prusa gcode generator to compare against Skreelink's gcode and the output is nearly identical. I tweaked settings to use Prusament values for PETG and PLA and turned on the Anchor Frame. The frame helps with adhesion and…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Drucke zuerst die Datei Advent_Test (1).gcode um zu sehen, ob die Kerze passt. Einstellungen: 0.4 Nozzle 10% Füllung (Gyroid) Keine Stützen notwendig
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
I used several Thingiverse models to create this advent decoration. The wreath base is generated with a scad file from https://www.thingiverse.com/thing:1240419 . A poinsettia flower from https://www.thingiverse.com/thing:1185399 was…
Print approx. €10.73–€13.12 excl. taxPreliminary estimate for one variant
Emperor Gun Jojo's Bizarre Adventure
Print approx. €6.63–€8.10 excl. taxPreliminary estimate for one variant
For little explorers who are ready for the next challenge, there is the "Advanced Shape Set". This set expands the horizons of learning by introducing more complex shapes where it helps stimulate fine motor skills and eye-hand…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
BMW R 1250 GS Adventure Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Gameboy Advance Skadis Mount The Gameboy Advance is held secure but is easy to remove. Easy to print in two pieces (you may want supports for Skadis hooks). Orient the flat plate of the hooks against the bed and orient the GBA holder so…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant
This stand comes in handy to repair or mod Gameboy Advance handheld consoles. Repairs usually require taking apart the whole system, which can be challenging to put back together. When placing the device face down on a flat surface, the…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
Jo Jos bazar adventure Sex Pistols. They ride bullets to help guide them.
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
You might want to look at my recent Adjustable Exhaust v3 Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Spongebob Cup for being advaned stupid To Annoy your friends/students s.o. You can give it as a cup for being stupid. Remix of " https://www.thingiverse.com/make:564965 " Print instructions Scale the Model as you like, Split the Model for…
Print approx. €15.58–€19.04 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
Semi-Smart Advanced is a minimally invasive upgrade, which can be done on ALL Semi-Smart boards available to date. It just replaces the smaller OLED for a new, larger one, and the classic arduino nano with the stronger Arduino Nano R4.…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
A simple display stand for GameBoy game boxes. This display works with boxes for the original GameBoy, GameBoy Color, and GameBoy Advance games. This stand works with and without GameBoy game box protectors: https://amzn.to/3JLunHS
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
Hello 3D-Friends, this is a ready to print gcode for Prusa MK3.5 & MK3.5s to calibrate the k-factor for pressure advance (linear advance). It was created with Prusa Slicer 2.8.1 and this site:…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is a plastic cover that goes on the Advanced Bionics UHP for the Marvel series cochlear implant processors. The originals are extremely brittle and cost a lot of money, therefore I want to print my own instead of buying replacements.…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Advent wreath Simply plug them together and put 1 flame on each advent. Have fun ! Advendskranz Einfach zusammenstecken und an jedem Advent 1 Flamme draufstecken. Viel Spaß !
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
A small Advent wreath in which you put the candle upside down in the wreath depending on the day of Advent. If you pause the candle in G-code and change the color roller, you don't need to paint the flame. Ein kleiner Adventskranz bei dem…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
Credit to original creator: https://www.thingiverse.com/thing:5206053
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Remix of the PLA linear advance Gcode to use PETG instead of PLA.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
The legendary "Advanced Combat Blade model 90" from Battlefield 3 & 4. I designed it for a friend, who used this knife as his favourite weapon in BF3 & BF4. Our clan affectionately calls this knife “Teppichmesser” which means “box…
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
I decided I didn't like the center cap that comes with the Advanti Storm S1's I bought for my Miata. So I set out to print something more fun. This one features one of the older logo's Mazda used. The g-code file that is ready for…
Print approx. €2.54–€3.10 excl. taxPreliminary estimate for one variant
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
This game similar to tetris battle game, but the difference is the row will not disappear after complete. To win the game, player have to complete the tetris box 14x10 in shortest time. Roll the dice, to decide what is the next tetris…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas stojanek na hry game boy, gameboy color, gameboy advance. Tisknuto bez podpor Kontaktovat pro případnou spolupráci…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Hlavní díl a stojánek na žeton potulných nepřátel stačí tisknout tryskou 0,4 mm, vrstva 0,15 mm, vypnutý IS. Rámeček a diamant je lepší z duvodu velikosti tisknout tryskou 0,25 mm, vrstva 0,10 mm, vypnutý IS. Doporucuji nejdříve prilozit…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Battery cover for the GBA SP.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Thanks to reddit user hclrke for providing his design so I could fine tune the hole spacing and vertical supports. Used M3 socket cap screws of suitable length to mount the plate to the Mele as well as to mount this assemble to PPBAV2. I…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
A straight pipe adapter from a Kärcher WD3 to a Bosch AdvancedOrbit 18 2mm thick walls with .1 mm clearance on the inside for most optimum fit Kärcher pipe diameter - 35.30 mm Bosch pipe diameter - 29.00 mm Print and enjoy, maybe a layer…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Simple and easy to build lasercut Advent Calendar. Box size is 8x4x4cm This is meant to be cutted from 3 Sheets of 3mm Plywood or MDF (Size 700x500mm) Paint the wood before cutting to make the engraving look nice. Only the first sheet…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
When having both the optional “Hinged-Lid” and “Advanced Filtration System” add-on installed, you'll find you have to share 1 connection with both of them. I've adjusted the “Hinged Lid Hinge-Bracket-R” to accommodate “Advanced Filtration…
Print approx. €8.75–€10.69 excl. taxPreliminary estimate for PETGSource material: PET
Build your own filtration kit from cheaper parts. I modified the Advanced Filtration System Bracket to fit the following fan and filters I sourced from Amazon for a nice savings. Fits this filter $9/ea:…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
Simple block to advance a single piston on most 4 piston MTB brakes. Flip and rotate the block to advance your favorite (or least favorit) sticky piston for cleaning. just keep an eye on the piston as you advance it, to make sure it…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
UPDATE 9/1/2025: Uploaded the V2 model and .gcode file.I installed the AD5M enclosure kit on my printer and the top loop of the PTFE tube was contacting the acrylic lid, so I shortened the height of the model another ~4mm to fit. I also…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
I remodel the original part in solidworks and added a vertical splash guard. This prevents the coffee powder from splashing over the portafilter. If you only need the main holder you can download the solidworks file and remove the splash…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
#SCADvent 2021
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Model Description: An insert designed to hold all the contents of the deluxe base game, Phantom Voyages, and the upgraded boss meeples in the original boxes. The Phantom voyages box holds the envelopes for the expansion, dice, overflow…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for PETGSource material: PET
I needed a replacement battery cover since I lost the one for my old GBA SP years ago. Print upside down with supports for the back tabs. I'll admit it's a pretty tight fit - I could probably make it a full 1mm thinner and it'd be fine -…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Print your own advent calendar with a stylish hexagon-look and add some 3d-printed flair to the holiday season! Perfectly sized for a daily dose of a small chocolate treat (I ended up using Lindor Truffles). I've added all the files to…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Hi All! Here is my design for a spool holder for Ender 3 Pro/Standard printers (or any other printer with a 20x20 top profile) which should allow for a very fast spool change without issues. The concept is simple, lock the various…
Print approx. €8.56–€10.47 excl. taxPreliminary estimate for one variant
A bottle cover that keeps your beer cooler for a bit longer if you want to drink it later. The walls are about 10mm. Bottles differ a lot so this one fits to most Czech beers, some German too but no guarantee. The bottle used for the…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for PETGSource material: PET
Model of Grim, from the series Grim Adventures of billy and Mandy. Printed 15% infill + Tree supports. Care with arms and staff when removing supports. This is the first time I've taken one of my blender art and turned it into a 3d print…
Print approx. €4.43–€5.42 excl. taxPreliminary estimate for one variant
A case for the Blurolls kit for the Core One. Should also work with the original fan/filter of the Core One or Mk4 enclosure. However, I was unable to test this.…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET
The Manfrotto Compact Advanced Smart Tripod is an okay-ish tripod (cheaper Chinese ones on Amazon are better - trust me, don't buy this thing), but it lacks the little hook you can add bags to weight it down. This simple printed hook…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Candle holder which consists of two parts which can easily put together, so there is no need for support structures. The nail can be filled with a Ø 2mm x 50mm rod, so it gets stable. Category: Decor
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Completely designed in Tinkercad, free online fonts, and conversion tools. Made for the MK3 build surface. This project is using twenty six 5x2mm magnets to retain the movable wreath. Print multi color with single nozzle printer by doing…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Version 1.0 This was my first ever 3D Creation, using ideas from other people's designs over several different platforms Please be advised that some slots i am yet to adjust as after print i had not measured some things correctly so will…
Print approx. €11.24–€13.74 excl. taxPreliminary estimate for one variant
Design Exploration About 10 years ago, I designed a coaster and produced hundreds in my woodshop out of walnut and maple. I wanted to produce a 3D printed version that could both be customized and less bulky (original wood coaster was…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
A simple device that slips over the existing knobs for Azimuth (also fits the RA clutch knob, sorta) and gives a better feel and more control. Intended as a tool shared between the knobs, but could be installed permanently if you want (I…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
This is the latest and greatest Mechanical Pencil Cap for Paper Mate Advanced (aka. MPC for PMA, or just MPC ;) I don't know to whom I should attribute the head of Dwayne, The Rock, Johnson. That model has been put so many things, the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Candle holder for a beautiful advent wreath or just for the Christmas table. Holder is created for two cadle sizes (40mm or classic tealight and 60mm). Print instructions: Holder and spike should be print in 100:98 scale ratio because of…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET
(German description below) We want to use the Micro:bit for my company's Advent coding. It should also look festive. Our apprentices will program the Christmas micro:bits with the young people. Let's see what comes out! Printing settings…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
The Advanced Filtration System fan started making clicking noises after a few prints. I figured out this was due to too much pressure from the filter component on the fan wall. The kit comes with a foam insert and the feet of the insert…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A little clip to retain your usb cable to your headset
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Crystal Bowl *Advanced* This model is for advanced users only! Printing: The crystal bowl is printed with two separat perimeters. A different stl-model is used for each perimeter. The inner part object is scaled to 99,8% in x and y. It is…
Print approx. €18.44–€22.53 excl. taxPreliminary estimate for one variant
Simple sturdy case for the ODROID-GO Advance
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Simple and cute BMO 3D model to be printed. Attached photo is my own make of the print.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
This is a storage solution for the free Print & Play (PNP) game Agents of Adventure which the files are provided at PNPArcade . I found the game to be super fun as it pits your 3 heroes against tons of different bosses (Masterminds) and…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Prusa Advanced Filtration System Bracket remixed to fit Fette Filter 100x100x30mm ( 4" x 4" x 1.2") Fette Filter - Air Purifier True HEPA Replacement Filter Compatible with OSIMO A2 Air Purifier with High-Efficiency Activated Carbon…
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for PETGSource material: PET
As I did not buy the “coffers packs” from Restoration Games, I lacked the advantage tokens. However they are quite usefull, thus I designed some myself. I highly reccomend using the 2color printing files, the picture should tell you why.…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Print in ABS or ASA or PC blend carbon power on the heater only with exhaust closed (recycling air)
Print approx. €7.57–€9.25 excl. taxPreliminary estimate for one variant
I created this box to hold the Go stones that come with every Go game set. Other boxes allow for holding the black and white stones, but don't give you a place to hold the stones you capture from your opponent during play. This box does…
Print approx. €7.66–€9.37 excl. taxPreliminary estimate for one variant
If you have the Prusa Advanced Filtration installed with the Filter Adapter by Das-Werkshopz (https://www.printables.com/@Rwyla_311695) and you like the Flaps by Miroslav Černý (https://www.printables.com/@MiroslavCerny_37372) , you can…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to adapt the Prusa Advanced Filtration System, originally designed for the Prusa Enclosure, to my IKEA Lack enclosure. Since it already came with a filter bracket, I didn't want to waste filament modifying it and printing a new…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
Most Expensive Doorstop? I wanted to justify the purchase of an iPad Pro and 3D printer to myself so.... I designed this next gen door wedge. First design but works well for the stoppage of doors. We have big gaps under our doors and this…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
100x160mm sign, reading "Take my advice: I'm not using it" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
A simple mount to hold the included tool holders / organizers from the 2025 Wera Advent Calendar. This will fit on standard 1" spaced pegboard and uses the MegaMount system. If you were lucky enough to receive one of these calendars I…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Prusa Advanced Filtration System Conversion Kit for CORE One This conversion kit allows the Prusa Advanced Filtration System originally designed for the Enclosure to be used with the Prusa CORE One. It provides a practical way to reuse…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
Adventskranz Weihnachstbaum mit Kerzenhalter. Das Modell besteht aus drei Teilen und kann zum Aufbau einfach zusammen gesteckt werden. Advent wreath Christmas tree with candle holder. The model consists of three parts and can be easily…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Advent candle & tealight holder here: https://www.printables.com/cs/model/322375-advent-candle-holder-with-removable-spike No supports needed. Print ratio 100(easel):100(holder)
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
Útil.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
In addition to headphone holder design has two jack holders for 3.5mm (1/8") and 6.3mm (1.4") audio jacks and a simple guitar-pick holder on it. Printed with PETG and %15 infill. With V3 Upgrade Integrated a dedicated cable holder Refined…
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for PETGSource material: PET
🌍🧑🚀 Vesmírná dobrodružství – Kosmonaut, Země, Měsíc, Raketa a Saturn – Zápichy do dortů (Space Adventure Cake Toppers) 🚀🪐 Připravte se na galaktickou cestu s touto vesmírnou sadou zápichů do dortů! Perfektní pro malé i velké průzkumníky…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Pressure advance needs to be set differently on the first layer than other layers because of the "squish". Adapative pressure advance settings currently don't allow this. If the wrong settings are used then bed adhesion is extremely poor…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
This is a spacer bushing for the Advanced Filtration add-on for the hinged lid conversion for the Original Prusa Enclosure. Recommended Bolt = M3x25. Recommended Print settings for Prusa PLA: Layer Height: 0.2 Perimeters: at least 3…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
EN - Magnetic label in czech/slovak language, on the post box - to prevent adverisement. Magnets could be inserted from the bottom, could be fixed with glue. CZ - Magneticka cedulka na postovu schranku - bez reklamy. Magnety sa daju…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
The Official Prusa Hepa Filter is currently out of stock and quite expensive once i ship to Australia. This remix utilises the same base as the official mount but replaces the HEPA mount with a custom frame This model is an inplace…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
to better trap the heat when printing, or so the venting fans can do their work freely when needed, just slide the vent slider for needed option. can be operated to both left or right side depending which slide you put up or down. part…
Print approx. €6.36–€7.77 excl. taxPreliminary estimate for one variant
Drehknopf für Hercules Pult in weihnachtlichen Stil. Knob for hercules controller (x-mas look)
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Today I designed a stand for Advent candles — a small, elegant holder with ornamental decoration that gives it a festive character while keeping the candle securely in place. The shape is Christmas-inspired, with a balanced base and a…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
