plywood edge aligner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had a number of 3/8" plywood shelves which needed to be aligned at the outer edges. I figured a quick clip would do…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 46
- Makes
- 0
- Views
- 460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v2.0
I had a number of 3/8" plywood shelves which needed to be aligned at the outer edges. I figured a quick clip would do wonders, since the shelves aren't carrying much weight -- just an HO scale train.
If you're working with different thicknesses of ply, just scale this as necessary.
Print Settings
Printer:
Rigidbot
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament:
Microcenter PLA+
Orange
Notes:
The STL is arranged so it will print vertically, requiring no supports whatsoever. Just multiply it for as many clips you need, and come back in a while.
Category: DIY