Yakima Holdup Light Board adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a better way to attach a Thule light board to my US Yakima Hold-Up bike rack. So, I designed these brackets.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 33
- Makes
- 0
- Views
- 746
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I needed a better way to attach a Thule light board to my US Yakima Hold-Up bike rack. So, I designed these brackets. I printed in PETG at 80% fill for high strength.
You'll also need:
-30.5 x 40.5 mm rectangular steel tube stock (purchased at Hornbach)
-'L bracket' steel (cut to length to attach to the light board)
-M5 SHCS (12mm min length, attaches internal spacer to square tube)
-M5 x 45mm screws, washers and nuts (to attach L bracket to steel tube)
-M6 x 25mm screws, washers, nuts (to attach light board to L bracket)
-Yakima hold-up add on screw or M10/M12 screw to attach square tube to hold-up
-drill, bits, paint, etc
1) Cut the steel tube to length as desired. Bolt (or weld!) the L bracket to the square tube. 2) Drill appropriate holes for internal spacer M5 and Yakima bolt.
3) Paint
4) assemble
5) go ride!
Print instructions
Unassociated tags: Hold up, light board, light plate
Category: Sport & Outdoors