Counting matching models…
Lost an end cap for the Yakima roof rack. Could have bought a replacement cap for $5, but where's the fun in that?!? Printed in PETG, no supports. Fits as snug as the original. Added a simple design pattern but could easily be removed if…
Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…
Key for Yakima SKS lock with code A133 Based on Yakima control key design
Key for Yakima SKS lock with code A155 Based on Yakima control key design
For best results print on the flat face. I intentionally designed it so the layers are at an angle to the stresses. The clip would break otherwise.
I lost one of the end caps on my Yakima rack and found a file online to 3D Print, but it did not fit and only offered one side. I decided to design something in 360 and they did not turn out so bad at all. I printed both side and they fit…
I needed mounts to fit my Yakima ("powderhound" style) ski racks onto my older Thule load bars (LB50 rectangular bars). Zip ties worked OK but didn't hold up well when temps got below -20F and they couldn't make it through the car wash.…
I make this for Yakima JustClick T3 / whispbar T3 licence plate holder. Is holder for licence plate for bicycle holder. I brogen this original one. Printed on side for better strenght. Not print in position wich is on photo. Printed with…
Create spacers to allow the Yakima FatCat ski racks to be mounted to a Rivian crossbar with stainless T-Nuts. Used the following T-Nuts from Amazon. 6mm x35mm https://www.amazon.com/dp/B09TYS712R?ref=fed_asin_title&th=1&psc=1 The notched…
Storage Box for Rooftop Tent Parts + Yakima Torque Driver + Wrench 6 M3 x 30mm bolts or set screws are needed to assemble the hinges Custom inserts to fit the Antidote Studio RTT mounting metal bars and M8-1.25 (5/16" - 18 x 2") bolts.…
I modified this Yakima adaptor to work with the bulky Rivian OEM cross bars by assembling it with the mount created by Tinker86 on Thinkgiverse (https://www.thingiverse.com/thing:6533914). It is designed to be used with standard insects T…
Replace the bottle opener on your Yakima FullSwing bike rack with a removable number plate adaptor. Only post processing steps required is to install the 4x M5 heat set inserts. I used CNC Kitchens. Optionally I have provided 2x 25x10x3mm…
This adapter slips over a Yakima SpeedKnob tightening knob, adding a ¾" hex bolt that you can attach a wrench to for greater leverage. Tested and works perfectly on a Yakima RidgeBack hitch bike mount that was firmly stuck in my hitch and…
I designed this in SolidWorks to replace a missing Yakima Rack foot. it works perfectly. photos show original next to 3d print
I recently purchased a Yakima HoldUp bike rack and wasn't satisfied with the locks' protection from the elements. The locks have a sliding metal door in front of the keyhole meant to keep water out, but realistically it's not much…
Simple bracket for an older Yakima round bar system. Print in something weatherproof. I used PETG.
Wall hook for Yakima JLow. Probably fits many other Kayak Racks such as the Thule or any other that are similar in styles. Quick and easy print. Versions: V1 First upload (23-Sept-2025) Print Instructions: Print on its side In the slicer,…
Replacement for yakima part #8881401. Uses two m6 bolts to mount. Recommend printing ABS or PETG. Print 100% infill so it's still solid if it wears away. Model in picture was printed with a .6mm nozzle .3mm layer height with PETG-CF.
Onshape model Use TPU, wrap it on the round bar with the long leg pointing upwind (front of the vehicle). Slide to the width your canoe needs, strap it down with a good strap. NRS strap not required but they sure are nice! My print…
Allows you to latch/unlatch your SKS rack or accessory with a simple flat-bladed screwdriver. Engages the cam mechanism in the back of the SKS recess to do that. Removable from the SKS recess with some sort of hooked device like a lock…
Yakima canoe load Stop. Printing for first time now. Needs more iterations.
Look... It's not great... but it's a start... I'll try to make it better and update here when i do.
Custom caps for the Yakima car rack. The theme is kayaking. I print them with no support and face down, with 2 filament changes to provide the 2 color prints. The picture showing them face up is just for displaying options. I've also…
3D printable "uncut" control key used only for the removal and installation of an unlocked Yakima SKS core. Any rigid material should work. I recommend printing with a 0.15mm layer height . Remove the integrated support after printing (no…
Made an Yakima branded keychain for my SKS keys. This helps make them easier to keep track of. You can pick from a keychain that is cutout which I found is easier to see the logo or you can make one that does not have the logo cut out.
There's no obvious location to attach a licence plate or lights to the Yakima Holdup 2. This adds some holes to mount stuff to. 2x M8 nuts and 2x M6 nuts required. The nut holders go behind the bottle opener. f3d files included for you to…
Adapter for Tesla roof rack cross bar (I have a 2023 Model Y) to allow me to mount a Yakima bike rack. Also included are some spacers that ensure the front wheel holder is in the right position when its up. They mount to the bar with a…
Look... It's not great... but it's a start... I'll try to make it better and update here when i do.
I needed a better way to attach a Thule light board to my US Yakima Hold-Up bike rack. So, I designed these brackets. I printed in PETG at 80% fill for high strength. You'll also need: -30.5 x 40.5 mm rectangular steel tube stock…
Ever lose the top cap on your Yakima Two Timer bike rack but you don't want to pay $4.00 plus $10.00 shipping to get a new one? Now you can just print one! https://yakima.com/products/tray-rack-mast-cap #8890296
I bought this used Bike Rack and I broke it on the first day. Made it so I can use it. Hope this helps someone too.
Grumpy's Remix of Pure Goof's Yakima License Plate Flipper. No longer a flapper! The plate is made to fit my local bike rack plate size (ACT, AU), and is designed to lock into position in both the upright and down positions of the Yakima…
Simple hinged brackets so you can attach tail lights and a number plate (or tag if you're in the USA) to the Yakima Bike Rack. Where I live you are required to have lights and a number plate on the rack by law; or you risk getting a…
New Version: There has been no problems with the original version as of yet. It has survived a hot summer and still going strong. However, after printing and installing, there were a few tweaks I wanted to make. The end edges that wrap…
Requires: 2x T-slot bolts, washers and nylock nuts (https://www.amazon.com/gp/product/B0BNQW7PCN) NMO Antenna Mount ((https://www.amazon.com/gp/product/B012E4AM7U)) Print Settings: 0.6mm CHT nozzle 0.4mm layer height Polymaker PA6-CF…
