AXA Window Handle Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement window handle for an early 1990's vintage AXA casement window, model unknown.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a replacement window handle for an early 1990's vintage AXA casement window, model unknown. The original became brittle and broke. UV embrittlement?
To install this, I had to drill out the original rivet pin holding the handle in place. You'll need to drill the rivet hole in the aluminum handle to 5.5mm (I used a 0.228" drill) to accommodate the snap-fit pins for the new part.
Print two pins and one handle. There really isn't a perfect print orientation, you may need to use supports. The pins are designed to snap into place. I used a large slip-joint pliers to snap them in all the way and secure the new handle.
I included .3mf, .stl, and Solidworks .prt files for remixing.
Print instructions
Unassociated tags: AXA Window, window handle, window lever
Category: Replacement Parts Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Yes
Supports: Yes
Resolution: 0.2mm
Infill: 30%
Filament: Prusa PLA Black
Notes:
You may want to use a raft on the press-fit pins. I used support on build plate only for the lever, printed on the large flat surface on the 'top' of the lever.