Counting matching models…
This is an indicator holder for use on a lathe with and AXA toolpost. As the title indicates, this is one of several versions so pick the one you like - or make your own improved version! Similar holders have been made by others before,…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
This is an indicator holder for use on a lathe with and AXA toolpost. As the title indicates, this is one of several versions so pick the one you like - or make your own improved version! Similar holders have been made by others before,…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
Use this adapter to mount your Dremel type 395 rotary tool to an AXA tool holder for fitment onto an AXA tool post. The design does not require additional hardware, but rather clamps the dremel as the tool holder screws are tightened. I…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
pro odreagování a relax hračka do kapsy
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
Holder for AXAGON HUE-S2BL 4-Port USB 3.0 hub; the design is parametric so it can be used for similar items. Print instructions Exact model of hub this design is intended for. The model is parametric, so you can use it for any device with…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
The factory clips for holding the screen/blind together consistently fall-out. This clip is design to securely connect to the screen while allowing a quick disconnect to the screen. PETG, 0.3mm layer height works great. Not tested with…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
This is an indicator holder for use on a lathe with and AXA toolpost. As the title indicates, this is one of several versions so pick the one you like - or make your own improved version! Similar holders have been made by others before,…
Print approx. €2.68–€3.27 excl. taxPreliminary estimate for one variant
It is necessary to play with the diameter and width. Each round hole is a slightly different diameter (+- 1 mm). See picture for dimensions used. The outer circle is printed with luminous material so that the holes are visible at night.
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for PETGSource material: PET
Magnet for relaxation and keeping attention You need 24 magnets for one toy.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
Based on my famous ultra articulated snake, i proudly present the ultra articulated axalotl! There are two sizes of the axalotl, an adult and a baby. The cover image is vertex painted and rendered, because i have no multicolor printer ;-(…
Hollow relaxation ball, printed from PETG. The original model is 200mm in diameter, but can be scaled up or down. It can be used as decor in your office, home or car. I printed this ball scaled down to 35% (70mm in diameter), which you…
The Relaxaurus Pal from the Palworld game in high resolution! Each part (ears, legs, mouth, etc) is separated in the file for easier multimaterial printing, but it can also be easily printed all in the same filament if you plan on…
Anneaux de relaxation: Très bon moyen de se relaxer et se détendre… les deux anneaux tournent sur eux-mêmes dans tous les sens, mais restent dans leurs logements respectifs… sauf si vous forcer bien sûr… ❗Attention pour la couture à…
Not my files. Reuploaded for my collection. Thingiverse thing:5763262 by Rop09
Not my file. Reuploaded for my collection Thingiverse thing:5738746 by alane0709
Not my file. Reuploaded for my collection Thingiverse thing:5752468 by Superknutselsmurf
Not my files. Reuploaded for my collection Thingiverse thing:5787531 by alfringant
Not my files. Reuploaded for my collection. Thingiverse thing:5723777 by Kubiczech81
Not my file. Reuploaded for my collection Thingiverse thing:5752440 by Superknutselsmurf
This tool post holder rack was created to help organize my lathe workspace. Initially, I am posting the tool holder rack that fits my lathe perfectly. In the next couple days, I will update the design to include a bigger opening for the…
Not my file. Reuploaded for my collection. Thingiverse thing:5772182 by mkiiina
The keychain is pretty small, it looks better sized up. A color change can be added and if you keep the size the same as how I made it, the color change should be at layer 18. Most types of keychain rings could work no matter how big you…
This is a holder for AXA 100 Quick Change lathe tool holders; yes the "Holder Holder" in the thing name is intentional :) Designed to be screwed to a board or wall by your lathe, it holds two AXA 100 tool holders. I suggest using it with…
A small saxophone recorder. You need a reed.
LEGO Locomotive LDM 12 MALAXA
Indicator holder for AXA quick change tool posts. Modeled on a Phase II 900-102 but it fits every other no name Chinese indicator I've tried. Indicator secured with an M3 screw and nut. Works in the facing direction as well if flipped…
If you don't have a coloring book and simply want to unwind without the stress of perfection, try using these templates to craft your own special project. Utilize either one or both templates to get started. Trace the shapes and embellish…
The motor is Mabuchi 010. Also you need M2 screws with nuts. Un automotor pe care sa il poata tipari 3D toti pasionatii din Romania. Daca aveti planuri de la locomotive romanesti va rog sa mi le trimiteti la [email protected] pentru a…
This is exactly the same as the remixed library however it allows the grid to work for vertical shapes as well as horizontal. Just call cuboid_grid([x,y,z], hex_width, wall_width); And the grid will render on the side with the largest…
This guy looked like he was enjoying a nice cup of joe at the museum so I decided to capture him. This urn can be found at The Field Museum in Chicago, IL. "Ceramic urn, Zapotec (AD 200-800), Oaxaca State, Mexico" was captured using 123D…
120% scaled ocarina :)
Not my file. Reuploaded for my collection. Thingiverse thing:5752481 by pleinair37
Let's be real... is a bathroom break even a break without your phone? 📱🚽 Welcome to the modern world, where true relaxation doesn't begin when you sit on the toilet. It begins when you pull out your smartphone! Meet Toilet Scroll Ghost ,…
Hello Guys, in attachment you can find AXA type 250-00X for small Dial Test indicator with 8 mm stem for your minilathe. Since i bought toolpost on chinese market place, i hope that the measure can fit also for your AXA toolpost, try to…
Do you struggle scraping wax off your Skis/Snowboard? Well look no further, I introduce you to the WaxAway, the 3D printed wax scraper. It takes ~1 hour to print and fits on all 3D printers. Each side is flat, allowing you to add your own…
"The H-II (H2) rocket was a Japanese satellite launch system, which flew seven times between 1994 and 1999, with five successes. It was developed by NASDA in order to give Japan a capability to launch larger satellites in the 1990s. It…
This model lets you store a AXA lathe toolholder in a 1x3x4U GridFinity box. The toolholder is modeled after a Shars 250-101, so I can't guarantee that other brands fit as well. There is just enough room for your average indexable tool.…
Modular Massage Roller| Video ✨ Meet our fully customizable Modular Massage Roller , 3D-printed for ultimate versatility and comfort! 🖐 Two handle styles : One-handed version – compact and ergonomic, perfect for quick self-massage.…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Palworld inspired, Relaxaurus, Tabletop DnD miniature with or without 25mm medium base which can be used for DnD…
A target patch dispenser remixed from eSamK's design. ( https://www.thingiverse.com/thing:3437913 ) I changed it to hold the Canaxa 17mm target patches rolls (~87mm OD, ~42,3mm ID and ~19,2mm tall). It's also modified so that the tabs…
remix from https://www.thingiverse.com/thing:3465176 Model of the USS Ares from the Star Trek Fanfilm " Axanar " Mode
The tetrahedron can calm you down while you study, help you focus your thoughts when you turn it in your fingers, and maybe you'll come up with a solution to a problem when you relax.
I lost the knob on my bike lock, it seemed wasteful to just replace the complete lock so I designed a replacement.
Updated! Increased fillet size on cylinder wall Pivot for shower door. Used as an Axam replacement part but looks interchangeable with many of their models. Printed in PETG 0.2mm strength settings on P1S. Used a heated insert which caused…
The replacement bottom cover that ensures the integrity of the case as a whole. Compatible with the AXAGON EEM2-SG2 AXAGON EEM2-SBC.
Hello, the AIM of this holder was to to fit an Parkside grinder PFBS 12 B3 (battery version) on my AXA 250-000 toolpost, i tested also on Parkside 160 B2 (electrical power version). During the devolping phase i created also an adapter in…
Avevamo in mente di creare un modello di Palworld ed eccolo qui! Relaxaur!!
I used this simple sliding clip for storing AXA toolholders behind my lathe. The holders slide along 1" (25mm) aluminum extrusions. This was my first print after building my Prusa. I printed them in draft mode, 15% infill and raised the…
Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Быстросменный резцедержатель, AXA QCTP 250-111 250-101 for WM210.…
This is a replacement part for the LaTrax Battery Hold down. I printed is with 100% infill just incase. Variable Layer Height is also suggested if you print it as pictured.
Fits the PM-1228 lathe backsplash, 5 recess's fit 6x3mm magnets
AXA Flex Mount Alternative Required hardware: 1x - DIN 912 M5x16 1x - DIN 934 M5 2x - Cable ties 8x1.5 mm or similar (max 8 mm wide and 1.8 mm thick)
This tool post holder can help organize lathe workspace Can use with 20mm series aluminium profile
This display block meshes with the now wildly popular Gridfinity system to allow you to display and store up to 7 of your favorite Wyrmwood Hexagonal table top tiles. This block takes up a 2 by 3 grid space on a Gridfinity base plate.…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon - where you can ask me to make minis for you, get updates…
A simple (not) case for a USB3 to SATA adapter and disk because I didn't want to pay the same price for a USB2 adapter with its own case the old version has all the tabs on one side, which when combined with the fact that the tabs are too…
Here is another starfinder mini Ysoki Envoy gang leader Jabaxa from the dead suns adventure path Ysoki envoy leader hard scrabble collective gang. Category: Models
VELKORUM – Anthropomorphic Horror Miniatures Collection by Crazy3D Enter the brutal world of VELKORUM — a dark fantasy collection of highly detailed tabletop miniatures designed for painters, collectors, RPG campaigns, skirmish games, and…
The original holder is great, but i wanted a little bit of colour around the edge. This clip is compatible with the hexagonal medal holder and can be easily moved to different locations.
This is a replacement part for mounting your AXA Pico 30 (T) bike headlight. The plastic attachement on the black backside of my headlight broke off, so I designed this part. It can simply be screwed on the back using the original screw…
what. This is an add-on for the Ortlieb Anti-Theft-Device , literally linking compatible Ortlieb bags with AXA frame locks that are compatible with RLC chains; I use an AXA Defender, thinking about switching to an AXA Victory. As I "lost"…
Taxation is Slavery License Plate frame, 2 parts to fit normal printers.
The mounts include a slight 8-degree angle to help ensure tool holders sit against the mounts, eliminating the risk of tools possibly sliding off while not introducing additional difficult replacing tools on the mounts. The print file is…
Just a reminder, that you want to chill the F out 😂 If you print this, posting a make will be highly appreciated!
Hier findest Du alle speziellen AXA-Lampenhalterungen für deine Fahrradgabel! 🚲 Die Halterungen unterscheiden sich zum Teil in der Befestigungsart und Bauweise, wie die Fahrradlampen 💡 von der Firma AXA am Fahrrad angebracht werden…
Insert for the holes scattered about the trailer frame. Lipped models are good for TPU, no lip good for rigid materials.
Holder for AXA RLS 115/10 snaps on seat post Ø27. I made it from Prusament PC blend. But i think that PETG or ASA is ok. Dont use PLA 0.3mm layer height perimeters = 3 infill 40%…
Print upside down with a high infill density and high wall count, I used PETG 80% infill density and 6 walls, 6 top and bottom layers. Requires no supports. May fit other quick change tool posts with a nut measuring 0.857 inches or…
Simple folding table to be installed above table next to main door. Wall is at an angle so bracket needed to sit level. Also I didn't want it to be supported by nut-rivets in aluminum wall alone, so it also connects to steel frame at top.…
Safety cap for the table leg on the Cricket and Mantis trailers from Taxa
Remixed a design so it fit on the back splash of the PM1228 lath. Added two holes to pass through 1/4 20 threaded rods to combine and strengthen them. Also created more holders like Oil Can (with brush in lid), oil bottle that came with…
Printable spacers for the Maxace Pian. The file labeled “Pian Spacers (Full)” is the base copy of the titanium spacers included with the Pian. There is no jumping. “Pian spacer (full jumping)” is the base copy but with positive jimping.…
what. Where to put the security chain of your AXA frame lock while riding? I don't like to put it on my frame or those official saddle-bags. Also, I need the connector on the lock for my bag . I wanted to be able to strap it around me,…
Print using 4 walls, 25% infill and supports for optimal strength for the dovetails. Magnets holes are for magnets sized diameter 8mm x 4mm. If you would like a version using smaller magnets let me know
Axa smart easyfix 89mm hinge fill plate for aligning doors. Might work with other 89mm hinges as well. Plate sits behind the hinge. Default thickness is 1mm, scale to your needs. Use PETG (or better) and 100% infill
Bring vacation vibes to your desk with this fun and detailed tropical decoration! Featuring a relaxed pineapple lounging in a coconut drink beneath a palm tree, this model is perfect for anyone who loves summer, beaches, and playful 3D…
2x1 Gridfinity Basisplatte für die AXA Schnellwechsel-Stahlhalter Größe AA
This is designed to match the OEM door stop from Taxa. The original bolt and threaded plate must be used to fit it back onto the trailer. I printed it at 0.24mm layer height at 3 walls in TPU 95. The results are perfect and seem more…
A cover for anchor hooks on the wall, meant to be printed in TPU.
I've bought a new bicycle lock and the only position left for its mount, where it wouldn't interfere with bags or other accessories, was on the downtube, right behind the front wheel. And to protect the code mechanism from flying dirt,…
2x1 Gridfinity Basisplatte für die AXA Schnellwechsel-Bohrstangenhalter Größe AA
Taxation Is theft Magnet for your fridge, uses 10mm magnets
I lost the battery cover for an AXA Nox Sport bike light, so I reversed engineered it. This fits on a Nox Sport from 2023. Not sure if the light's design has changed over the years and, therefore, if it fits all models. Recommended…
To install in the rail, simply insert and rotate it quarter turn, and push trough the HUB.
I saw one of these for an OXA quick change tool post but it doesn't work with the tool post that I have. This dial indicator mount is for the AXA tool post that Little Machine Shop sells. It doesn't say AXA but has the numbers 250-100 or…
Gridfinity for AXAGON EE25-GTR ICY box
Allows a magnetic stick on mount for iPhone, iWatch and AirPods combination charger to steel wall via magnets. Particularly nice for a Taxa Mantis camper where the frame is steel and there is not a lot of shelf space for phone charger…
AXAGON EEM2-UG2 case holder that holds your external NVME SSD on top of your laptops monitor. The box for the disk is 39mm tall → there are three versions: Tight-Fit, in which the gap is tightest (39.6mm); Looser-Fit, in which the gap is…
Designed in Siemens SolidEdge. Replacement body for Axagon 3.5 inch hdd caddy inspired by Playstation 2. The stock body has no ventilation and has resulted in my HDD overheating and dying. The fan can be connected to 7V (between 5V and…
Holder for AXAGON HUE-SA7BP 7-Port USB 3.0 for Alliminium profile Assembly: M8 screws for alliminium profile and nuts. Print Settings : I printed it with this settings from PLA and PETG-CF all good. Layer height 0.2mm If you need any help…
A mounting bracket for the AXAGON HUE-SA7BP USB hub with a integrated cable organizer, a czech brand of USB hubs and all sort of tech accesories. Meant to be mounted to a surface via either M4 bolts or wood screws. FreeCAD project file…
Mount for Raspberry Pi 5 with the JOY-IT Armor Fan Case and the AXAGON EE25-A6C 2.5" SSD/HDD enclosure. Designed for quick installation onto a DIN rail . Layer height: 0.2 mm Material: PLA or PETG Infill: 15% Supports: Not required
I used CNC Kitchen's https://bumpmesh.com tool to add a hexagon pattern to the cover
flaschen halter zum befästeigen der flasche im fahrad schlos halter
Holder for AXAGON HUE-SA7BP 7-Port USB 3.0 wall mounted for my PC desktop setup
📝 Description This is a Gridfinity-compatible holder designed specifically for the Bergeon JAXA 2819 Mini watch case opener. It keeps the tool securely in place while providing quick and easy access on your workbench. The design fits…
Printed with PLA, 0.2 mm layer, 30 % gyroid infill. Supports needed for the top. Hole is M8. The part fits both sides while allowing the usage of the front face usb port.
Mount to attach Axagon USB hub to the bottom of desk
