Cable chain for K1/K1C with ptfe guide. Increased for 3mm [All in one]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cablechain for K1 printers with ptfe guide. Increased for 3 mm. Can be installed on LID riser v3
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 147
- Makes
- 0
- Views
- 696
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You need: Cable_Link_K1_9x15_v14_increased_3mm.stl or Cable_Link_K1_9x15_v14_increased_3mm_increased_pin_0.5.stl - x22K1_cable_chain_link_with_PTFE_tube_guide_increased_3mm.stl or K1_cable_chain_link_with_PTFE_tube_guide_increased_3mm_increased_pin_0.5.stl- x3K1_Cable_Chain_Rear_Bracket_v1_increased_3mm.stl - x1Chain_Link_Riser_Extended_v1_increased_3mm.stl - x1
If you using LID Riser V3, you also need[c]_x1_K1C_V3_CHAIN_ADJUSTMENT_increased_3mm.STL - x1
02.05.2026 UPD
Added a version for cable_chain_links with pins increased by 0.5 mm. This makes them hold better.
I recommend printing these ones.
+ Added Cable_Link_K1_9x15_v14_increased_3mm_increased_pin_0.5.stl
+ Added K1_cable_chain_link_with_PTFE_tube_guide_increased_3mm_increased_pin_0.5.stl
With much thanks:
E.Korsakov (Author)