Cable chain for K1/K1C with ptfe guide. Increased for 3mm [All in one]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cablechain for K1 printers with ptfe guide. Increased for 3 mm. Can be installed on LID riser v3
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You need: Cable_Link_K1_9x15_v14_increased_3mm.stl or Cable_Link_K1_9x15_v14_increased_3mm_increased_pin_0.5.stl - x22K1_cable_chain_link_with_PTFE_tube_guide_increased_3mm.stl or K1_cable_chain_link_with_PTFE_tube_guide_increased_3mm_increased_pin_0.5.stl- x3K1_Cable_Chain_Rear_Bracket_v1_increased_3mm.stl - x1Chain_Link_Riser_Extended_v1_increased_3mm.stl - x1
If you using LID Riser V3, you also need[c]_x1_K1C_V3_CHAIN_ADJUSTMENT_increased_3mm.STL - x1
02.05.2026 UPD
Added a version for cable_chain_links with pins increased by 0.5 mm. This makes them hold better.
I recommend printing these ones.
+ Added Cable_Link_K1_9x15_v14_increased_3mm_increased_pin_0.5.stl
+ Added K1_cable_chain_link_with_PTFE_tube_guide_increased_3mm_increased_pin_0.5.stl
With much thanks:
E.Korsakov (Author)