Figurine base: Ayanami Rei 2007 Portrait 2 Plugsuit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A base of Ayanami Rei figurine in plugsuit 2007 Portrait 2 collection. See figure in attached photo.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
A figurine base for this figure.
Figurine identification link = https://myanimeshelf.com/figures/153807_Evangelion_Portraits_2:_Ayanami_Rei_Plugsuit_Ver.
I don't think the original figurine has a reinforced column but I add one. The figurine is probably quite old, so there is a good chance she will begin to lean over any time now, so a reinforcement should reduce that.
The base is designed to be quite thick, because the inserts need to have some sort of grip so none of them will lean off. I've tried making them hollow and it was not successful in keeping her standing straight. This is the best one so far.
To print, simply lay the parts on the plate. Every part has a side that will lay flat on the bed. No support needed.