Halo Warthog Wireless Charger Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Working: https://www.youtube.com/watch?v=YjSm-wzr5-w If you'd like me to hire me to create a custom charger, feel free…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 27
- Makes
- 0
- Views
- 380
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Working: https://www.youtube.com/watch?v=YjSm-wzr5-w
If you'd like me to hire me to create a custom charger, feel free to send me a message.
Charger: https://www.adafruit.com/product/2162
If you want to make the charger case, use these files,not the ones from source file. STLs are scaled slightly smaller.
Two main body files are included. The main one has mounting spots and holes. The other is the original in case you want to make your own modifications. Holes fit M3 screws. May need to be drilled out more.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm layer heights
Infill:
10%
Notes:
Every part except the windshield needs support.
Post-Printing
May have to do the usual cut and sand cleanup.
I initially used superglue to join the pieces. The front wheel axles need a lot of sanding to make flush. I ended up welding the axles to the body with a soldering iron. You can feed in a strip of filament as if it were solder to add plastic to gaps and add strength.
Holes on the circuit-mounts may need to be drilled out a little to fit the length of the screws.
Although the version I made uses wood and drilled holes, you should not have to do this since I scaled it down to fit the charger more snug. You will still need to glue the main plate in.
How I Designed This
Chopped off the turret, added mounts from one of my designs, put a hole through the piece, and scaled the bed to fit a square charger.
Category: Electronics