1 / 14
MV5 - Fecal tank 1/8 scale — image 1
1 / 14

MV5 - Fecal tank 1/8 scale

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

RC model of fecal tank connectible to ST-180 Tractor

Rating
0 / 5
Likes
4
Makes
0
Views
144
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

RC model of fecal tank connectible to ST-180 Tractor

Dimensions:

  • Length = 825 mm

  • Width = 295mm

  • Height = 385 mm

  • Weight = cca 4 kg

Filaments consumption: 

  • 3,5kg PLA

  • 0,5kg TPU 90A

Print settings:

  • standard value of infill is 15%, if a different value is needed, it is stated in the file name

  • 2 perimeters

  • concentric pattern of top layers for tires

  • classic generator of thin walls, do not use arachne

  • print speed for TPU/Flex max. 40mm/s

  • All of printed parts are designed for printing without supports, necessary supports are always included in STL files.

  • Use standard printing values according to the producer of filament.

                                You will need non-printed parts:

Hardware:

  • 61700 2RS/ZZ bearing…………..8pcs

Fasteners:

  •  Button head M2x6   ISO 7380…..19pcs

  •  Button head M2x8   ISO 7380…...6pcs

  •  Button head M3x6   ISO 7380…..32pcs

  •  Button head M3x8   ISO 7380…..44pcs

  •  Button head M3x10  ISO 7380…..18pcs

  •  Button head M3x12  ISO 7380…..17pcs

  •  Button head M3x16  ISO 7380…..24pcs

  •  Button head M3x20 ISO 7380…..1pc

  •  Button head M3x25 ISO 7380…..1pc

  •  Button head M3x30 ISO 7380…..1pc

                                            Assembly Manual

The illustrated Assembly Manual will guide you through assembling the model. It contains all information necessary for successful assembly of this model.
Before you start the  assembly please read thoroughly  the entire manual!
Download link of Assembly Manual: 

Assembly Manual MV5 Fecal tank PDF     

                          What would your model look like..

You can share your experiences and more at Facebook/3Direction   

                                                   Notice

Remember that the PLA used to print the Belt DriveBox parts is not heat resistant, so only drive for short intervals. Otherwise, there is a risk of melting the gears.
If you want, you can print the Belt DriveBox parts from PETG to use in hot weather or rougher driving.
Always operate the model on open terrains, far from cars, traffic and other people.
Always keep the model in view and under control. 
Use only fully charged batteries.
Always keep the transmitter switched on when the model is switched on.
Always remove the battery before disassembling the model. 
Keep moving parts clean and dry at all times. 
Always remove the battery after use. 
Never operate the model with damaged wiring.
Never touch rotating parts.     

For more info: https://www.3direction.com/

                            Terms and Conditions of Use

By downloading the files you agree with these Terms and Conditions of Use, you agree that 3Direction is not responsible for any harm or damage caused by  using printed  parts or whole model. By agreeing with these Terms and Conditions of Use  of 3Direction you agree to use this model at your own risk.

You may print or download the files from this site solely for your personal, non-commercial use only provided that you agree not to change or delete any copyright or proprietary notices from the files.

The files (STL, 3mf, PDF) may contain technical, typographical, or photographic errors.

The model is intended for fun driving and load corresponding to the possibilities of the listed printable materials, 3Direction bears no responsibility for any defect of the model caused by use, especially excessive use.

You can always print damaged parts again and again and again....:-)

Tags