Bookoo Themis Mini Drip Tray Mount - Profitec Go
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom insert to integrate the Bookoo Themis Mini scale into the Profitec Go drip tray for a low-profile finish.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
The Model
This insert allows you to mount a Bookoo Themis Mini scale directly into the Profitec Go drip tray. This modification provides a flush, integrated look and maximizes the distance between the scale and the portafilter for larger cups.
Print Settings
Material: PETG, ABS, or ASA (Must be heat and water resistant)
Layer Height: 0.2mm
Infill: 30% (Grid or Gyroid)
Walls/Perimeters: 3-4
Supports: Recommended for the mounting lip/overhangs.
Hardware / Assembly
Tools Needed: Flush cutters (bolt cutters), Dremel/angle grinder, and a metal file.
Modification: You must cut a section out of the original stainless steel drip tray to fit this insert.
Finishing: File the edges smooth after cutting. It is highly recommended to sand the tray and apply a waterproof lacquer/paint to prevent corrosion on the raw edges.