Bookoo Themis Mini Drip Tray Mount - Profitec Go
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom insert to integrate the Bookoo Themis Mini scale into the Profitec Go drip tray for a low-profile finish.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
The Model
This insert allows you to mount a Bookoo Themis Mini scale directly into the Profitec Go drip tray. This modification provides a flush, integrated look and maximizes the distance between the scale and the portafilter for larger cups.
Print Settings
Material: PETG, ABS, or ASA (Must be heat and water resistant)
Layer Height: 0.2mm
Infill: 30% (Grid or Gyroid)
Walls/Perimeters: 3-4
Supports: Recommended for the mounting lip/overhangs.
Hardware / Assembly
Tools Needed: Flush cutters (bolt cutters), Dremel/angle grinder, and a metal file.
Modification: You must cut a section out of the original stainless steel drip tray to fit this insert.
Finishing: File the edges smooth after cutting. It is highly recommended to sand the tray and apply a waterproof lacquer/paint to prevent corrosion on the raw edges.