1 / 15
Case for Nuand bladeRF 2.0 Micro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case I designed for Nuand's bladeRF 2.0 micro. The case has a lip top and bottom to index the case halves together,…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 383
- Makes
- 1
- Views
- 1,673
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case I designed for Nuand's bladeRF 2.0 micro. The case has a lip top and bottom to index the case halves together, and the two pieces fasten with 1" long 2-56 screws and captive nuts at bottom.
The non-MMU top has an embossed RF symbol. The MMU version gives pieces to fill in the RF symbol so you can print pretty colors like I did. I still haven't used the micro yet; if it runs hot I'll include another top shell with the RF logo cut all the way through to let heat out.
Enjoy!