Headamame headband mount with nuts
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.72 – €0.88 net (excluding VAT)
For file: Headamame nutted center - Part 1_0.4n_0.2mm_PLA_MINIIS_39m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.80 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 39 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Center mounts with pockets to insert nuts for threading the machine screws into.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Headamame project is great and some of the remixes (like the triply periodic minimal surface lattice) are fantastic additions. But threading machine screws into printed plastic parts is silly, so I remodeled the cone center headband mount and added pockets for nuts. There are four M4 nuts for the driver mount machine screws and one 6-32 (?) nut for the pivot bumper which are easy to find at your local hardware store. @thunderkeys already uploaded an M3 threaded insert remix of the clamps if you want to replace those 2 mm self tapping screws as well. You can edit a copy of my model in Onshape here.