IBC Bung Plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2in bung plug with vent outlet; that goes into the 6in cap for a IBC tote.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This is a bung plug for a IBC tote. It goes in the 6" cap of the IBC tote. I couldn't get one with a vent in it or with the right threads for the inside of the IBC tote cap. the center "vent pipe" is 1/2in outside diameter for a vent tube. I have two IBC totes stacked on top of each other and are connected for water storage/use. so the bottom tank needs to be vented to above the level of the top tank so they can act as "one big Tank". So this Bung Plug makes it possible.
I also added another version that has a 1/2in inside diameter hole for faster air flow. If I was filling the IBC totes the smaller vent wouldn't vent air fast enough for my usage. So I made another with a bigger hole.
I printed it out of PETG, with 5 bottom layers, 4 walls, and 25% infill. Hopefully this will make it water tight. If not, I'll spray with with a water proofing spray.
I also modified an existing Bung Wrench to have a hole in the middle so you can tighten and loosen this plug. I have that in another model.