Nex Playground remote cover with AirTag

Protective TPU Case for Nex Playground Remote (AirTag Slot)

This is a flexible TPU cover for the Nex Playground remote with a built-in slot for an AirTag so you can keep track of it.

The design is intentionally on the thicker side for added durability and a more substantial feel in the hand.

Important:
This model must be printed in TPU (or a similar flexible filament). Rigid materials like PLA, PETG, or ABS won’t flex enough to get the remote in and will likely crack or not fit at all.

Features:

• Open-front design that exposes the buttons and face of the remote

• Full wraparound body for protection on the sides and back

• Thicker wall profile for durability and a more solid grip

• Internal AirTag slot

• Bottom access hole to push the AirTag out for easy battery changes

Printing Recommendations:

• Material: TPU (recommended 95A or similar)

• Layer height: 0.2 mm

• Walls: 4 perimeters (used for the model shown)

• Infill: ~25% for a more solid, impact-resistant feel

• Print speed: 20–40 mm/s

Tuning for Your Preference:
This model leans toward a more rugged, “chunky” feel:

• Increase perimeters and/or infill for even more stiffness and protection

• Reduce them if you want a slimmer, more flexible cover

Notes:

• Install the AirTag before inserting the remote

• Use the bottom hole to push the AirTag out when needed

• Fit may vary slightly depending on TPU brand and printer tuning

If you find this useful, feel free to leave a like or share your make!