1 / 21
M920q/x M720q Vented Extended Cover with 120mm Fan — image 1
1 / 21

M920q/x M720q Vented Extended Cover with 120mm Fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Vented M920q/M720q cover adding 175mm PCIe slot & 120mm fan. Ideal for open-source router builds with OPNsense+Coreboot

Rating
0 / 5
Likes
9
Downloads
90
Makes
0
Views
1,069
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

Lenovo ThinkCentre M920q / M920x / M720q — Vented Extended Cover with 120mm Fan

Drop-in replacement for the standard side cover, adding a full-length single-slot PCIe card slot (up to 175mm) and a 120mm top-mounted cooling fan. Designed to turn these tiny machines into genuinely capable open-source routers, firewalls, or compute nodes without sacrificing thermals.


Print settings

Material: PETG recommended, ABS or ASA also suitable. PLA not advised given potential case temperatures. Supports: Required only on the two rear latches — everything else prints clean. Minimal post-processing needed. Orientation: Print as-oriented in the file.


Bill of materials

  • PCIe riser FRU 01AJ902 — AliExpress

  • PCIe 3.0 x8 flex extension cable — AliExpress (x8 is sufficient for M920q/M720q; only M920x has full x16 electrical)

  • 5× M3 heat-set inserts (3mm depth) + matching bolts

  • 120mm PC fan — ideally with dust filter, ≤800 RPM strongly recommended for acceptable noise

  • Assorted heat shrink tubing for power cable splice insulation

  • Male 2-pin PC fan header with short leads

  • 4 fan mounting screws


Wiring

The 120mm fan is powered by splicing into the original case fan connector. You only need two wires: yellow (+12V) and black (GND). Insulate all joints with heat shrink. No additional power draw concerns at 120mm/800RPM.


Recommended use case — open-source router/firewall

With a 35W i7-8700T this machine becomes a remarkably capable open-source firewall. I personally run an Intel X710-DA4 Quad SFP+ card with OPNsense, which fits perfectly in the 175mm slot.

CPU sizing guide:

  • i3-8100T / i5-8500T — adequate for most home setups up to ~2.5Gbps

  • i7-8700T — handles 5Gbps WAN with multiple rules, VLANs and bridging comfortably; just about adequate at 10Gbps

  • i9-9900T — better choice if 10Gbps is the target

Important VRM note: The M920q/M720q has a VRM limitation. With 65W non-T variants (e.g. i7-8700) the VRMs get very warm. The M920x does not share the same problem.


This is part of a larger open-source project

For full Coreboot installation on the M920q, including ME neutralisation and verified boot, see: 🔗 https://coreboot.f4lc0n-industries.co.uk/m920q.html

With Coreboot + OPNsense + this cover you get a near-complete open-source stack on the most critical device in your home network.

Tags