1 / 7
DIY MAIRA Belttensioner - siManthrop Edition — image 1
1 / 7

DIY MAIRA Belttensioner - siManthrop Edition

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Affordable and easy to build DIY belt tensioner

Rating
0 / 5
Likes
3
Downloads
63
Makes
0
Views
314
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I designed my own Version of MAIRA's affordable DIY belt tensioner. Much smaller and more rigid with an excluded PSU.

Documentation: https://mairapp.com/home/maira-seat-belt-tensioner-kit/

Please read both manuals before starting this project!

The Seatbelttensioner can be used with MAIRA App or to get it compatible with every Sim with MAIRA-Simhub Plugin! I am actually making my own SeatBeltTensioner Plugin with many Features Maira or Simhub doesnt have, will publish it soon.

Recently i added two progressiv Levers, they have the benefit of higher Speeds around Idle and higher Pulling Forces. Also they reduce Stress on the Gearbox.

Instead of the PSU I suggested, you can also use any other PSU with 12V and 30A. Like the original one MAIRA recommends.


What you'll need:


Screws required:

  • 2x M3x8 ISO 4762

  • 4x M3x15 ISO 4762

  • 12x M4x12 ISO 4762

  • 4x M6x15 ISO 4762

  • 4x M6x20 ISO 4762

  • 2x M6x15 ISO 10642

  • 4x M6 Washer

  • 2x M6 Nut

  • 8x M6 T-Nut


Needed Heatinserts:

  • 2x M3

  • 12x M4


The Printparts can be printed with almost no supports. Only at the Pulley Supports are needed. Please be careful in which direction the Housing will be printed, picture attached.

I printed the Mainbodys and Pulleys with an 0.6mm Nozzle, 4Perimeters and 30% Gyroid Infill. I recommend PETG, but PLA will be fine too.

Tags