Red Herring Full Stock For Bolt Primed Configs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parralaxaint and Vanishing pointnot.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 10
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A stock that allows bolt prime red herrings to properly get a stock hold and to be able to prime the blaster while doing so.
There is 4 4-40 screws to secure the buttplate.
The 4 screws that secure the stock to the rest of the blaster needs a long screw driver.
You need to remove the old buttpads to install this.
Pictures are included to give a rough guide on what is supposed to go where.
Pairs well with the reinforced bolt mod I posted here as well.
Hardware-
The 4 holes that secure the stock can use either #6 screws (like the original, but needs drilling to widen the top 2 holes on both sides) or 3/4 inch #4 4-40 screws (like mine is but the screws are a super weird ass size) You will need to tap 2 new holes for the top screws (easy with coarse threaded screws that start it for you).
2 extra 4-40 3/8 screws (the standard slug ones)
A decent length of 3-32 elastic
A long boi screwdriver (8+ inches)